Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

EGW
S&W 1911 ADJUSTABLE VORTEX RAZOR SIGHT MOUNT

841370116904 296000555
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.831" Overall Width: 1.062" Mounting Hardware: (2) 8-32 Button Head Screws, (1) 8-32 Set Screw) Red Dot Fitment: Vortex Razor, C-More RTS & STS Simply remove the rear sight on your gun and replace it with our mount in order to mount your Vortex Razor, C-More RTS or STS red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs
84.9 84.9 1 EUR
Tuotenro: 296000555
EGW S&W 1911 ADJUSTABLE VORTEX RAZOR SIGHT MOUNT
Valmistajan tuotenumero: 49460 841370116904 Materiaali: 7075 Alumiini Pinnoite: Mattamusta Hardcoat Kokonaispituus: 1.831" Kokonaisleveys: 1.062" Kiinnitystarvikkeet: (2) 8-32 Nappipääruuvia, (1) 8-32 Säätöruuvi) Punapistetähtäimen yhteensopivuus: Vortex Razor, C-More RTS & STS Poista vain aseen takatähtäin ja korvaa se meidän kiinnikkeellämme, jotta voit asentaa Vortex Razor, C-More RTS tai STS punapistetähtäimen. Mitään muutoksia ei tarvita. Voit milloin tahansa ottaa kiinnikkeemme pois ja asentaa takatähtäimen takaisin. Kiinnitystarvikkeet sisältyvät pakkaukseen. Asennusohjeet Poista takatähtäin* Asenna EGW:n tähtäinkisko jyvään Kiristä säätöruuvi (jos sovellettavissa) Aseta punapistetähtäin EGW:n tähtäinkiskoon (pienen paperipalan laittaminen punapistetähtäimen ja tähtäinkiskon väliin helpottaa poistamista ja estää Loctiten joutumisen punapistetähtäimeen.) Levitä sinistä Loctitea mukana tulleille kiinnitysruuveille Kiristä kiinnitysruuvit momenttiin 15in/lbs
84.9 EUR 0 84,90 € *
Jälkitilaus, toimitusaika n. 4-12 viikkoa USA:n varastosta.
Ominaisuudet: Jalustojen lukumäärä: 1-Piece Malli: 1911 Materiaali: Aluminum Merkki: Smith & Wesson Tyyppi: Tactical Väri: Black

Ominaisuudet

Jalustojen lukumäärä: 1-Piece Malli: 1911 Materiaali: Aluminum Tyyli: Tactical Valmistaja: Smith & Wesson Väri: Black Toimituksen paino: 0,041kg Toimituksen korkeus: 25mm Toimituksen leveys: 89mm Toimituksen pituus: 140mm

Tuotekuvaus

Made in USA



Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.831" Overall Width: 1.062" Mounting Hardware: (2) 8-32 Button Head Screws, (1) 8-32 Set Screw) Red Dot Fitment: Vortex Razor, C-More RTS & STS Simply remove the rear sight on your gun and replace it with our mount in order to mount your Vortex Razor, C-More RTS or STS red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs
Uutiskirje