Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

EGW
S&W 1911 ADJUSTABLE LEUPOLD DELTAPOINT PRO SIGHT MOUNT

296000544
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.
84.9 84.9 1 EUR
Tuotenro: 296000544
EGW SIGHT MOUNT FOR LEUPOLD DELTAPOINT PRO FITS S&W 1911 BLACK
Valmistajan tuotenumero: 49395 Materiaali: 7075 Alumiini Päällyste: Mattamusta kova pinnoite Kokonaispituus: 1.811" Kokonaisleveys: .99" Kiinnitystarvikkeet: (2) 6-32 Pyöreäkantaruuvit, (2) 6-32 Litteäkantaruuvit, (1) 6-32 Säätöruuvi Punapistetähtäimen yhteensopivuus: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGW:n punapistetähtäimet on tarkoitettu asennettavaksi vasemmalta oikealle (kun piippu osoittaa eteenpäin). Liukujalka kapenee edistyksellisesti helpottaakseen asennusta. Poista vain aseen takatähtäin ja korvaa se meidän kiinnikkeellämme, jotta voit asentaa Vortex Viper/Venom, Burris FastFire tai Docter punapistetähtäimen. Mitään muutoksia ei tarvita. Voit milloin tahansa ottaa kiinnikkeemme pois ja asentaa takatähtäimen uudelleen. Kiinnitystarvikkeet sisältyvät. Asennusohjeet Poista takatähtäin* Asenna EGW Tähtäinkisko liukujalkaan Kiristä säätöruuvi (jos sovellettavissa) Aseta punapistetähtäin EGW Tähtäinkiskoon (pienen paperipalan asettaminen punapistetähtäimen ja tähtäinkiskon väliin helpottaa poistamista ja pitää Loctiten poissa punapistetähtäimestä.) Levitä sinistä Loctitea mukana toimitettuihin kiinnitysruuveihin Kiristä kiinnitysruuvit momenttiin 15in/lbs 2 Pyöreäkantaruuvit - Mukana toimitettu Vortex Viper ja Venom tähtäimiä varten 2 Litteäkantaruuvit - Mukana toimitettu Burris FastFire ja Docter tähtäimiä varten Tämän kiinnikkeen mukana toimitetut ruuvit vaativat 5/64'' kuusiokoloavaimen asennukseen.
84.9 EUR 1 84,90 € *
Toimitusaika noin 2-4 viikkoa.
1 kpl. USA:n varastossa
Ominaisuudet: Jalustojen lukumäärä: 1-Piece Malli: 1911 Materiaali: Aluminum Merkki: Smith & Wesson Tyyppi: Tactical Väri: Black

Ominaisuudet

Jalustojen lukumäärä: 1-Piece Malli: 1911 Materiaali: Aluminum Tyyli: Tactical Valmistaja: Smith & Wesson Väri: Black Toimituksen paino: 0,04kg Toimituksen korkeus: 25mm Toimituksen leveys: 76mm Toimituksen pituus: 203mm

Tuotekuvaus

Made in USA



Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.
Uutiskirje