Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi
700371180294 430105290
The Strike Industries Ambush low profile sling loop is the lowest profile sling loop designed for the MIL-STD-1913 rail. Made of solid steel, its unique locking bar design system allows for it to be lightweight and durable. Because the Ambush sits flat in between the rails, it will not interfere with your sights and fit neatly under longer optics when mounted towards the middle of the rifle. The dual purpose loop and swivel sling attachments allow the user to choose which mount they would like to use. (QDSS not included) Package Contents: x1 Ambush Sling Loop x1 Screw x1 Universal QD Swivel Locking Bar x1 Warning card Product Features: Made of solid steel Dual purpose loop and swivel sling adapter Lowest profile sling mount No interference with optics Torque: Do not exceed 15 in/lbs (1.69 nM) for the Picatinny mount screws WARNING: Before every use, always check proper function of your QD mount and/or sling loop and any wear and tear from use Always have your weapon in the SAFE position when not being fired Always follow all firearms safety rules and never point your weapon at anything you are not willing to destroy -CALIFORNIA PROPOSITION 65 WARNING:- WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
44.9 44.9 1 EUR
Tuotenro: 430105290
STRIKE INDUSTRIES LOW PROFILE SLING LOOP - AMBUSH SLING LOOP 700371180294 Strike Industries Ambush on matalaprofiilinen asehihnan lenkki, joka on suunniteltu MIL-STD-1913 kiskoon. Valmistettu lujasta teräksestä, sen ainutlaatuinen lukituspuikon suunnittelujärjestelmä mahdollistaa keveyden ja kestävyyden. Koska Ambush asettuu tasaisesti kiskojen väliin, se ei häiritse tähtäimiäsi ja mahtuu siististi pidempien optiikoiden alle, kun se on asennettu kiväärin keskiosaan. Kaksoiskäyttöinen lenkki ja pyörivä asehihnan kiinnike antavat käyttäjälle mahdollisuuden valita, kumpaa kiinnitystä he haluavat käyttää. (QDSS ei sisälly) Pakkauksen sisältö: x1 Ambush asehihnan lenkki x1 Ruuvi x1 Universaali QD pyörivän lukituspuikko x1 Varoituskortti Tuotteen ominaisuudet: Valmistettu lujasta teräksestä Kaksoiskäyttöinen lenkki ja pyörivä asehihnan sovitin Matalin asehihnan kiinnitys Ei häiritse optiikkaa Vääntömomentti: Älä ylitä 15 in/lbs (1.69 nM) Picatinny-kiskon ruuveille VAROITUS: Tarkista ennen jokaista käyttöä asehihnan kiinnikkeen ja/tai lenkin asianmukainen toiminta sekä mahdollinen kulumisen aiheuttama haitta Varmista aina, että aseesi on TURVA-asennossa, kun sitä ei ammuta Noudata aina kaikkia aseiden turvallisuussääntöjä ja älä koskaan osoita asettasi mihinkään, mitä et ole valmis tuhoamaan -KALIFORNIAN EHDOTUS 65 VAROITUS:- VAROITUS: Tämä tuote sisältää kemikaaleja, joiden osavaltio Kalifornia tunnistaa aiheuttavan syöpää ja synnynnäisiä vikoja tai muita lisääntymisterveydelle haitallisia seikkoja. Lisätietoja: www.P65Warnings.ca.gov
44.9 EUR 7 44,90 € *
Toimitusaika noin 2-4 viikkoa.
7 kpl. USA:n varastossa
Ominaisuudet: Väri: Black

Ominaisuudet

Väri: Black Toimituksen paino: 0,034kg Toimituksen korkeus: 3mm Toimituksen leveys: 108mm Toimituksen pituus: 152mm

Tuotekuvaus

USA:n vientiluvan tyyppi: 0A501.x



The Strike Industries Ambush low profile sling loop is the lowest profile sling loop designed for the MIL-STD-1913 rail. Made of solid steel, its unique locking bar design system allows for it to be lightweight and durable. Because the Ambush sits flat in between the rails, it will not interfere with your sights and fit neatly under longer optics when mounted towards the middle of the rifle. The dual purpose loop and swivel sling attachments allow the user to choose which mount they would like to use. (QDSS not included) Package Contents: x1 Ambush Sling Loop x1 Screw x1 Universal QD Swivel Locking Bar x1 Warning card Product Features: Made of solid steel Dual purpose loop and swivel sling adapter Lowest profile sling mount No interference with optics Torque: Do not exceed 15 in/lbs (1.69 nM) for the Picatinny mount screws WARNING: Before every use, always check proper function of your QD mount and/or sling loop and any wear and tear from use Always have your weapon in the SAFE position when not being fired Always follow all firearms safety rules and never point your weapon at anything you are not willing to destroy -CALIFORNIA PROPOSITION 65 WARNING:- WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. For more information: www.P65Warnings.ca.gov
Uutiskirje