Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

EGW
SIG SAUER P220 10MM HUNTER LEUPOLD DELTAPOINT PRO SIGHT MOUNT

841370117086 296000541
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.
84.9 84.9 1 EUR
Tuotenro: 296000541
EGW SIG P220 10MM HUNTER LUEPOLD DELTAPOINT PRO SIGHT MOUNT
Valmistajan tuotenumero: 49392 841370117086 Materiaali: 7075 Alumiini Päällyste: Mattamusta kova-anodisointi Kokonaispituus: 1.811" Kokonaisleveys: .99" Kiinnitystarvikkeet: (2) 6-32 Pyöreäkantaruuvit, (2) 6-32 Litteäkantaruuvit, (1) 6-32 Säätöruuvi Punapistetähtäimen yhteensopivuus: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGW:n punapistetähtäimet on tarkoitettu asennettavaksi vasemmalta oikealle (kun piippu osoittaa eteenpäin). Liukujalka on vähitellen kapeneva, jotta asennus olisi helpompaa. Poista vain aseen taka-äkä ja korvaa se EGW:n kiinnikkeellä, jotta voit asentaa Vortex Viper/Venom, Burris FastFire tai Docter punapistetähtäimen. Aseen muutoksia ei tarvita. Voit milloin tahansa ottaa kiinnikkeemme pois ja vaihtaa takaisin taka-äkän. Kiinnitystarvikkeet sisältyvät. Asennusohjeet Poista taka-äkä* Asenna EGW:n tähtäinkiinnike liukujalkaan Kiristä säätöruuvi (jos sovellettavissa) Aseta punapistetähtäin EGW:n tähtäinkiinnikkeelle (pienen paperipalan asettaminen punapistetähtäimen ja kiinnikkeen väliin helpottaa irrottamista ja pitää Loctiten poissa punapistetähtäimestä.) Levitä sinistä Loctitea mukana tuleviin kiinnitysruuveihin Kiristä kiinnitysruuvit 15in/lbs momenttiin 2 Pyöreäkantaruuvit - Mukana Vortex Viper ja Venom tähtäimille 2 Litteäkantaruuvit - Mukana Burris FastFire ja Docter tähtäimille Mukana tulevat ruuvit vaativat 5/64'' kuusiokoloavaimen asennukseen.
84.9 EUR 0 84,90 € *
Jälkitilaus, toimitusaika n. 4-12 viikkoa USA:n varastosta.
Ominaisuudet: Jalustojen lukumäärä: 1-Piece Malli: P220 Materiaali: Aluminum Merkki: Sig Sauer Tyyppi: Tactical Väri: Black

Ominaisuudet

Jalustojen lukumäärä: 1-Piece Malli: P220 Materiaali: Aluminum Tyyli: Tactical Valmistaja: Sig Sauer Väri: Black Toimituksen paino: 0,454kg Toimituksen korkeus: 25mm Toimituksen leveys: 25mm Toimituksen pituus: 25mm

Tuotekuvaus

Made in USA



Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.811" Overall Width: .99" Mounting Hardware: (2) 6-32 Button Head Screws, (2) 6-32 Flat Head Screws, (1) 6-32 Set Screw Red Dot Fitment: Vortex Viper/Venom, Burris FastFire, Crimson Trace CTS-1200, CTS-1300, Docter EGW's red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with our mount in order to mount yourVortex Viper/Venom, Burris FastFire, or Docter red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Button Head Cap Screws - Provided for Vortex Viper and Venom Sights 2 Flat Head Cap Screws - Provided for Burris FastFire and Docter Sights The screws that are included with this mount require a 5/64'' allen wrench for installation.
Uutiskirje