Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

EGW
SIG SAUER M17 ADAPTER PLATE DELTAPOINT PRO TO VORTEX VENOM

841370111978 296000649
The rear sight plate on your gun needs to be removed to install your red dot on this plate. The plate is mounted to the slide from underneath the slide using the provided 4-40 screws. The red dot is then installed on top of the adapter plate using the provided 6-32 screws. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. Dose not work with Sig P320RX, P320 X-Five W/Romeo1 Cut or M17 Military Surplus.
84.9 84.9 1 EUR
Tuotenro: 296000649
EGW SIG SAUER M17 ADAPTER PLATE DELTAPOINT PRO TO VENOM
Valmistajan tuotenumero: 49201 841370111978 Aseen takatähtäimen levy on poistettava, jotta punapistetähtäin voidaan asentaa tälle levylle. Levy kiinnitetään liukukiskoon alapuolelta mukana toimitetuilla 4-40 ruuveilla. Punapistetähtäin asennetaan sitten adapterilevyn päälle mukana toimitetuilla 6-32 ruuveilla. Asennusohjeet Poista takatähtäin* Asenna EGW-tähtäinkisko uraan Aseta punapistetähtäin EGW-tähtäinkiskolle (pienen paperipalan asettaminen punapistetähtäimen ja tähtäinkiskon väliin helpottaa poistoa ja pitää Loctiten poissa punapistetähtäimestä.) Levitä sinistä Loctitea mukana toimitettuihin kiinnitysruuveihin Kiristä kiinnitysruuvit momenttiin 15in/lbs Aseen muokkaaminen voi mitätöidä valmistajan takuun. Tämän tuotteen tulisi asentaa ja tarkistaa pätevän aseseppä. Vastuuta ei oteta vahingoista tai loukkaantumisista, jotka voivat aiheutua tämän tuotteen väärästä asennuksesta tai käytöstä. Ei sovellu Sig P320RX, P320 X-Five W/Romeo1 Cut tai M17 Military Surplus -malleihin.
84.9 EUR 0 84,90 € *
Ilmoita saatavuudesta
Ei saatavilla.
Ominaisuudet: Jalustojen lukumäärä: 1-Piece Malli: P320 X-Five, M17, M18 Materiaali: Aluminum Merkki: Sig Sauer Tyyppi: Adapter Bases Väri: Black

Ominaisuudet

Jalustojen lukumäärä: 1-Piece Malli: M18,P320 X-Five,M17 Materiaali: Aluminum Tyyli: Adapter Bases Valmistaja: Sig Sauer Väri: Black Toimituksen paino: 0,045kg Toimituksen korkeus: 25mm Toimituksen leveys: 51mm Toimituksen pituus: 140mm

Tuotekuvaus

Made in USA



The rear sight plate on your gun needs to be removed to install your red dot on this plate. The plate is mounted to the slide from underneath the slide using the provided 4-40 screws. The red dot is then installed on top of the adapter plate using the provided 6-32 screws. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. Dose not work with Sig P320RX, P320 X-Five W/Romeo1 Cut or M17 Military Surplus.
Uutiskirje