Korisi on tyhjä.

Ostoskori

09-5122933

Tilaa uutiskirje

BROWNELLS
MAUSER 91 DOVETAIL FRONT SIGHT BLANK

050806101524 078050000

Kuvaus
Arviot (10)

Ready To Fit & Shape For Custom Applications

.375" high blade lets you zero the Model 96 Swede and others to point of aim. Square post blade gives an easy-to-see, well defined sight picture with issue rear sights. Plenty of extra material so you can file and shape the blade to original contour or a custom shape. 5.26mm dovetail fits the Mauser front sight base. Fits most Mauser 91 through 98 rifles with military sight base.

SPECS: Steel, blued, matte finish. .077" (1.9mm) wide, .375" (9.5mm) high above 81° x .207" x .081" dovetail. May require minor fitting.

Lisää...

Asiakasarviot: BROWNELLS MAUSER 91 .375" DOVETAIL FRONT SIGHT BLANK STEEL BLACK

Arvioiden lukumäärä: 10
Arvostelut brownells.com sivustolla: 10
Arvioiden keskiarvo: 4,4

CMP legal (26.4.2010)

This front sight is now legal for CMP's Vintage rifle matches. Most Mauser front sights are too short for regulation at 100 or 200 yds and their pyramid shape is harder to see than a square partridge style blade. This blade is easy to install and file the height to regulate to 100 yds. A little cold blueing after filing and you're in business. I have used them on my Swede M-96 and German K-98.

I really liked this product (20.1.2011)

Excellent replacement of stock military sight; easily filed to proper height. Flat top easier to see than stock military sights. Would buy again.

Very Nice Sight (2.9.2011)

Hello,Tall Mauser sights have been hard to find. My Gewehr 88 Commission Rifle (bought for [$] for the folks who hate me mentioning this!) takes Mauser sights and had been shooting a foot high at 50 yards, and I'm not sure how high at 100!I bought this sight blank, fitted it, brought it down to my preferred elevation, sharpened the top with a "V" shaped carbide knife sharpener, blued it, and proceeded to enjoy!I highly recommend this to anyone who hates holding under. It is a quality product.I'm so impressed I'm posting a review on all the boards I belong to, recommending this product. Thank you,Josh

Front Sight blade (19.3.2012)

These sight blades save me heaps of time when setting up a good service rifle, I used to have to weld up all my Swedish mauser sights to get them to shoot to the point of aim but with these inserts I just file them to height plus since they are square they provide a better sight picture.

Exactly what I needed! Another home run! (17.7.2013)

I have a 1928 Carl Gustafs Swedish Mauser. I was able to locate an original competition rear peep sight for it...only trouble was that the original front sights was way too low.

After trying to find original sights, I stumbled upon this one. It DOES require fitting, so get out your small precision files, and sandpaper, and spend some time doing it right.

After about 30min filing, I had it fit. As for the height? 100% correct. The rifle now shoots point of aim and in line with the yardage numbers on the peep.

Nice quality, and nice flat finish. I recommend this product.

Very Happy! (3.2.2014)

Just put this on my Yugo M24/47. The original front sight was installed from the RIGHT looking at the target so tap it out from the LEFT side. The bottom of the new sight base had to be filed down by about 0.01 inch to fit. Also filed down the base corners every so slightly to alow easier installation. Put Frog Lube on it to prevent rusting and help slide it in place. Put some red fluorescent paint on it and checked windage while looking through barrel at yonder pine tree top. Off to the range with it now!

prepare to file (20.6.2015)

The paperwork says minor fitting may be necessary. Thats an understatement. Will not even come close to fitting K98, M48, M24/47 Mausers. I have all three and this sight is nowhere close to fitting without major modifications. The dove tail angle is incorrect, its too thick, too long and too wide. It doesnt even fit the specs that Brownells publishes. 4.5 hours with a file and i am still trying to get the thing to fit. i see all these good reviews, i guess i am the lucky one that got the lemon.

Dissapointed (11.2.2017)

I found this item to be somewhat irritating simply because the dovetail angle is incorrect, on my 1915 M-96 Swedish Mauser. The angle is not as steep as the factory dovetail cutout, and this causes you to have to reshape the angle. I don't mind flling/sanding; but the angle should match the Factory cutout...it does not.

Front sight replace in my Mitchell mause (16.4.2017)

My Mauser was shooting high. I bought brownels front sight and used a set of needle files. The sides of the dovetail were steeper than that of the front sight so I filed to fit. Be careful how much you take off the sight it needs to fit tight. I used my micrometer. I was able t fit it well and shot at the range. Of course it shot very low so I filed the top of blade and made fast adjustments. I got it shooting dead on and it is better than the factory sight. I wish there was a rear replacement as the Mauser rear is a bit junky. This replacement blade is all you need and will work fine on any Mauser that I can imagine. some fitting will be required becausethere is too much variation from Mauser to Mauser. By it you will be happy have a smith place it if you can't. This is a very good product I'm glad I bought it.

A FEW MINUTES OF FILING (25.8.2017)

Took about 20 minutes with a couple files and was good to go. Fit my Yugoslavian m24/47 but had to take .020" off the bottom with a flat course file and I used my triangle shaped file on the dove tails to get those to fit my base. It's about .200" taller than the one that was on it so hopefully I'll get the impact where it should be. Not a foot high at 100 yards. Just remember it's made big so you or your gunsmith can fit it to your rifle.

Lue 10 arvostelua lisää brownells.com sivustolla

21.9 21.9 1 EUR

Tuotenro: 078050000
BROWNELLS MAUSER 91 .375" DOVETAIL FRONT SIGHT BLANK STEEL BLACK 050806101524 . 375" blade voit hakeutua malli 96 ruotsalainen ja muut pisteen tavoitteen. Neliön post terä antaa helppo hiippakunta, hyvin määritelty näky kuvaa ongelman taka nähtävyyksiä. Runsaasti lisämateriaalia niin tiedoston ja muokata terä alkuperäinen ääriviivat tai mukautettuun muotoon. 5,26 mm sovittaa sopii Mauser etutähtäin pohja. Sopii useimmat Mauser 91 kautta 98 kiväärit sotilaallinen näky pohja.

21.9 EUR 101 21,90 € *

Varastossa, toimitusaika 2-4 viikkoa.

Ominaisuudet: Korkeus: .375 Malli: 94, 91, 93, 98, 96, 95 Materiaali: Steel Merkki: Mauser Tyyppi: Dovetail Väri: Black

Lisää toivelistaan

Kysy tuotteesta

Tiedot

Lisää toivelistaan

Kysy tuotteesta

Ominaisuudet

Korkeus: .375 Malli: 91,93,94,95,96,98 Materiaali: Steel Tyyli: Dovetail Valmistaja: Mauser Väri: Black Toimituksen paino: 0,009kg Korkeus: 13mm Leveys: 86mm Pituus: 259mm

Tuotekuvaus

Made in USA

Kuvaus
Arviot (10)

Ready To Fit & Shape For Custom Applications

SPECS: Steel, blued, matte finish. .077" (1.9mm) wide, .375" (9.5mm) high above 81° x .207" x .081" dovetail. May require minor fitting.

Lisää...

Asiakasarviot: BROWNELLS MAUSER 91 .375" DOVETAIL FRONT SIGHT BLANK STEEL BLACK

Arvioiden lukumäärä: 10
Arvostelut brownells.com sivustolla: 10
Arvioiden keskiarvo: 4,4

CMP legal (26.4.2010)

I really liked this product (20.1.2011)

Excellent replacement of stock military sight; easily filed to proper height. Flat top easier to see than stock military sights. Would buy again.

Very Nice Sight (2.9.2011)

Front Sight blade (19.3.2012)

Exactly what I needed! Another home run! (17.7.2013)

Very Happy! (3.2.2014)

prepare to file (20.6.2015)

Dissapointed (11.2.2017)

Front sight replace in my Mitchell mause (16.4.2017)

A FEW MINUTES OF FILING (25.8.2017)

Lue 10 arvostelua lisää brownells.com sivustolla

Muut ostivat

SINCLAIR INTERNATIONAL BULLET COMPARATOR & BUMP GAGE BODY
SINCLAIR INSERT STYLE BULLET COMPARATOR

SINCLAIR INTERNATIONAL

Varastossa. Varastossa, toimitusaika 2-4 viikkoa.

23,90 € * 22,90 € - 23,90 €*

Luodin vertailijat, "Comparator"

3,1 (13)

WILSON COMBAT CM GROUP GRIPPER
1911 "GROUP GRIPPER" GUIDE ROD & PLUG

WILSON COMBAT

Tätä tuotetta ei voi valitettavasti tilata.

Rekyylijousen varusteet

4,8 (4)

HIVIZ S&W FRONT SIGHT, ORANGE
S&W OVERMOLDED HANDGUN FRONT SIGHTS

HIVIZ

Ei varastossa, ei voi laittaa jälkitilaukseen. Ei varastossa, ei voi laittaa jälkitilaukseen.

59,90 € *

Etutähtäimet

1 (1)

DEWEY CROCOGATOR PRIMER POCKET CLEANER
CROCOGATOR PRIMER POCKET CLEANER

DEWEY

Varastossa, toimitusaika 2-4 viikkoa. Varastossa, toimitusaika 2-4 viikkoa.

14,90 € *

Puhdistajat

4,6 (5)

SINCLAIR INTERNATIONAL #25 25° SHOULDER BUMP GAGE INSERT
SINCLAIR BUMP GAGE INSERT

SINCLAIR INTERNATIONAL

Varastossa. Varastossa, toimitusaika 2-4 viikkoa.

17,90 € * 15,90 € - 19,90 €*

Hylsytulkit ja sulkuvälin mittaus

3,1 (17)

Kirjaudu sisään

Unohditko salasanasi?
Rekisteröidy

Some

Sivuillamme

Tuoteryhmät

Tilaaminen

Asiakaspalvelu

Tervetuloa!

Tervetuloa brownells.fi sivustolle. Meillä on Suomen laajin valikoima asesepän tarvikkeita ja työkaluja, aseiden osia, jälleenlatausvälineitä, luoteja, hylsyjä, ammuntavarusteita, optiikkaa ja paljon muuta. Kymmenien tuhansien tuotteiden varasto, josta voit valita itsellesi sopivimmat tuotteet, olitpa sitten ampuja, metsästäjä tai aseseppä.

Tietoa meistä

Ampujat, metsästäjät, asesepät, aseharrastajat ja aseita työssään käyttävät ovat aina voineet kääntyä Brownellsin puoleen etsiessään korkealaatuisia tuotteita, osia, työkaluja, lataustarvikkeita, optiikkaa tai muuta aseisiin liittyvää. Meillä on aina 100% tyytyväisyystakuu!