Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

EGW
KIMBER FIXED SIGHT VORTEX RAZOR SIGHT MOUNT

841370112982 296000688
Simply remove the rear sight on your gun and replace it with EGW mount in order to mount yourVortex Razor, C-More RTS or STSred-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs The screws that are included with this mount require a 5/64'' allen wrench for installation. This mount does not fit: Kimber Micro Kimber Micro 9
84.9 84.9 1 EUR
Tuotenro: 296000688
EGW KIMBER 1911 FIXED SIGHT VORTEX RAZOR SIGHT MOUNT
Valmistajan tuotenumero: 49435 841370112982 Poista aseesi takatähtäin ja korvaa se EGW:n kiinnikkeellä, jotta voit asentaa Vortex Razor, C-More RTS tai STS -punapistetähtäimen. Voit milloin tahansa ottaa kiinnikkeen pois ja palauttaa takatähtäimen paikalleen. Kiinnitystarvikkeet sisältyvät pakkaukseen. Asennusohjeet: Poista takatähtäin* Asenna EGW:n tähtäinjalusta jyvän paikalle Kiristä asetuspultti (jos sovellettavissa) Aseta punapistetähtäin EGW:n tähtäinjalustalle (punapistetähtäimen ja jalustan väliin asetettu pieni paperinpala helpottaa irrottamista ja pitää Loctiten pois punapistetähtäimestä.) Levitä sinistä Loctitea mukana tulleisiin kiinnitysruuveihin Kiristä kiinnitysruuvit momenttiin 15in/lbs Mukana tulevat ruuvit vaativat 5/64 tuuman kuusiokoloavaimen asennukseen. Tämä kiinnike ei sovi: Kimber Micro Kimber Micro 9
84.9 EUR 0 84,90 € *
Ei saatavilla.
Ominaisuudet: Jalustojen lukumäärä: 1-Piece Malli: 1911, Desert Eagle 1911C, Desert Eagle 1911G Materiaali: Aluminum Merkki: Kimber, Magnum Research Tyyppi: Tactical Väri: Black

Ominaisuudet

Jalustojen lukumäärä: 1-Piece Malli: 1911,Desert Eagle 1911C,Desert Eagle 1911G Materiaali: Aluminum Tyyli: Tactical Valmistaja: Magnum Research,Kimber Väri: Black Toimituksen paino: 0,045kg Toimituksen korkeus: 25mm Toimituksen leveys: 76mm Toimituksen pituus: 140mm

Tuotekuvaus

Made in USA



Simply remove the rear sight on your gun and replace it with EGW mount in order to mount yourVortex Razor, C-More RTS or STSred-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs The screws that are included with this mount require a 5/64'' allen wrench for installation. This mount does not fit: Kimber Micro Kimber Micro 9
Uutiskirje