Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

EGW
H&K USP LEUPOLD DELTAPOINT PRO SIGHT MOUNT

841370114245 296000681
EGW red dot sightsare meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. No alterations are required. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount does not fit: USP Compact (rear sight cut depth is .200"" instead of .160"") USP Expert USP Elite VP9 VP40 P30 P30L P30SK HK45 HK45C
84.9 84.9 1 EUR
Tuotenro: 296000681
EGW H&K USP LEUPOLD DELTAPOINT PRO SIGHT MOUNT
Valmistajan tuotenumero: 49406 841370114245 EGW-pistetähtäimet on tarkoitettu asennettavaksi vasemmalta oikealle (kun piippu osoittaa eteenpäin). Jyvän urassa on progressiivinen kapenevuus, joka mahdollistaa helpomman asennuksen. Poista vain aseen takatähtäin ja korvaa se EGW-kiinnikkeellä, jotta voit asentaa Leupold DeltaPoint Pro, JPoint, Redfield Accelerator tai Optima punapistetähtäimen. Aseen muutoksia ei vaadita. Voit milloin tahansa irrottaa kiinnikkeen ja palauttaa takatähtäimen. Asennustarvikkeet sisältyvät. Asennusohjeet: Poista takatähtäin* Asenna EGW-tähtäinkiinnike jyvän uraan Kiristä kiinnitysruuvi (jos sovellettavissa) Aseta punapistetähtäin EGW-tähtäinkiinnikkeelle (punapistetähtäimen ja kiinnikkeen väliin asetettu pieni paperipala tekee irrottamisen helpommaksi ja pitää Loctiten poissa punapistetähtäimestä.) Levitä sinistä Loctitea mukana tulleisiin kiinnitysruuveihin Kiristä kiinnitysruuvit 15 tuumaan/paunaan Aseen muokkaaminen voi mitätöidä valmistajan takuun. Tämän tuotteen tulisi asentaa ja tarkistaa pätevä aseaseppä. Vastuuta ei oteta vahingoista tai vammoista, jotka voivat johtua tämän tuotteen vääränlaisesta asennuksesta tai käytöstä. Tämä kiinnike ei sovi seuraaviin malleihin: USP Compact (takatähtäimen uran syvyys on .200"" eikä .160"") USP Expert USP Elite VP9 VP40 P30 P30L P30SK HK45 HK45C
84.9 EUR 0 84,90 € *
Ilmoita saatavuudesta
Ei saatavilla.
Ominaisuudet: Jalustojen lukumäärä: 1-Piece Malli: USP 40, USP 9, USP 45, USP Tactical 9mm, USP Tactical 45 Materiaali: Aluminum Merkki: Heckler & Koch Tyyppi: Tactical Väri: Black

Ominaisuudet

Jalustojen lukumäärä: 1-Piece Malli: USP Tactical 9mm,USP Tactical 45,USP 9,USP 40,USP 45 Materiaali: Aluminum Tyyli: Tactical Valmistaja: Heckler & Koch Väri: Black Toimituksen paino: 0,045kg Toimituksen korkeus: 25mm Toimituksen leveys: 76mm Toimituksen pituus: 140mm

Tuotekuvaus

Made in USA



EGW red dot sightsare meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. No alterations are required. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount does not fit: USP Compact (rear sight cut depth is .200"" instead of .160"") USP Expert USP Elite VP9 VP40 P30 P30L P30SK HK45 HK45C
Uutiskirje