Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

EGW
CZ 75, 85, P-01, PCR VORTEX RAZOR SIGHT MOUNT

841370115891 296000705
Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs The screws that are included with this mount require a 5/64'' allen wrench for installation.
84.9 84.9 1 EUR
Tuotenro: 296000705
EGW CZ75, 85, P-01, PCR VORTEX RAZOR SIGHT MOUNT
Valmistajan tuotenumero: 49453 841370115891 Asennusohjeet Poista takatähtäin* Asenna EGW-tähtäinkisko uraan Kiristä kiinnitysruuvi (jos sovellettavissa) Aseta punapistetähtäin EGW-tähtäinkiskoon (punapistetähtäimen ja tähtäinkiskon väliin asetettu pieni paperinpala helpottaa irrottamista ja pitää Loctiten poissa punapistetähtäimestä.) Levitä sinistä Loctitea mukana tulleisiin kiinnitysruuveihin Kiristä kiinnitysruuvit momenttiin 15in/lbs Mukana tulevat ruuvit vaativat 5/64 tuuman kuusiokoloavaimen asennukseen.
84.9 EUR 0 84,90 € *
Ilmoita saatavuudesta
Ei saatavilla.
Ominaisuudet: Jalustojen lukumäärä: 1-Piece Malli: 75, 85, P-07, P-09, 97B, P-01, SP-01 Shadow, PCR, SP-01, SP-01 Phantom, 97D, P120 Materiaali: Aluminum Merkki: CZ, Tri Star Tyyppi: Tactical Väri: Black

Ominaisuudet

Jalustojen lukumäärä: 1-Piece Malli: PCR,75,97B,85,P120,P-01,SP-01,P-09,SP-01 Shadow,97D,SP-01 Phantom,P-07 Materiaali: Aluminum Tyyli: Tactical Valmistaja: CZ,Tri Star Väri: Black Toimituksen paino: 0,045kg Toimituksen korkeus: 25mm Toimituksen leveys: 76mm Toimituksen pituus: 140mm

Tuotekuvaus

Made in USA



Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs The screws that are included with this mount require a 5/64'' allen wrench for installation.
Uutiskirje