Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

EGW
CZ 75, 85, P-01, PCR LEUPOLD DELTAPOINT PRO SIGHT MOUNT

841370115914 296000677
Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mountwill make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount fits: CZ 75 CZ 75 SP-01 CZ 75 SP-01 Phantom CZ 75 SP-01 Shadow CZ 85 CZ 97B CZ 97D CZ P-01 CZ P-07 (may require fitting due to a variance in dovetail dimensions) CZ P-09 (may require fitting due to a variance in dovetail dimensions) CZ PCR (there will be a gap under the front of the adapter plate) Tristar P120
84.9 84.9 1 EUR
Tuotenro: 296000677
EGW CZ75, 85, P-01, PCR LEUPOLD DELTAPOINT PRO SIGHT MOUNT
Valmistajan tuotenumero: 49402 841370115914 Poista vain aseen takatähtäin ja korvaa se EGW:n kiinnikkeellä, jotta voit asentaa Leupold DeltaPoint Pro, JPoint, Redfield Accelerator tai Optima punapistetähtäimen. Voit milloin tahansa ottaa kiinnikkeen pois ja laittaa takatähtäimen takaisin paikalleen. Kiinnitystarvikkeet sisältyvät pakkaukseen. Asennusohjeet: Poista takatähtäin* Asenna EGW:n tähtäinkiinnike jyvään Kiristä asetuspultti (jos sovellettavissa) Aseta punapistetähtäin EGW:n tähtäinkiinnikkeelle (punapistetähtäimen ja kiinnikkeen väliin laitettu pieni paperinpala helpottaa irrottamista ja pitää Loctiten poissa punapistetähtäimestä.) Levitä sinistä Loctitea mukana tuleviin kiinnitysruuveihin Kiristä kiinnitysruuvit momenttiin 15in/lbs Aseen muokkaaminen voi mitätöidä valmistajan takuun. Tämän tuotteen tulisi asentaa ja tarkistaa pätevä aseaseppä. Emme ota vastuuta vahingoista tai loukkaantumisista, jotka voivat johtua tämän tuotteen virheellisestä asennuksesta tai käytöstä. Tämä kiinnike sopii: CZ 75 CZ 75 SP-01 CZ 75 SP-01 Phantom CZ 75 SP-01 Shadow CZ 85 CZ 97B CZ 97D CZ P-01 CZ P-07 (voi vaatia sovittamista johtuen jyvän mittojen vaihtelusta) CZ P-09 (voi vaatia sovittamista johtuen jyvän mittojen vaihtelusta) CZ PCR (adapterilevyn etuosaan jää rako) Tristar P120
84.9 EUR 0 84,90 € *
Ilmoita saatavuudesta
Ei saatavilla.
Ominaisuudet: Jalustojen lukumäärä: 1-Piece Malli: 75, 85, P-07, P-09, 97B, P-01, SP-01 Shadow, PCR, SP-01, SP-01 Phantom, 97D Materiaali: Aluminum Merkki: CZ Tyyppi: Tactical Väri: Black

Ominaisuudet

Jalustojen lukumäärä: 1-Piece Malli: P-09,P-07,SP-01 Phantom,SP-01 Shadow,97D,P-01,85,PCR,SP-01,75,97B Materiaali: Aluminum Tyyli: Tactical Valmistaja: CZ Väri: Black Toimituksen paino: 0,045kg Toimituksen korkeus: 25mm Toimituksen leveys: 76mm Toimituksen pituus: 140mm

Tuotekuvaus

Made in USA



Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mountwill make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount fits: CZ 75 CZ 75 SP-01 CZ 75 SP-01 Phantom CZ 75 SP-01 Shadow CZ 85 CZ 97B CZ 97D CZ P-01 CZ P-07 (may require fitting due to a variance in dovetail dimensions) CZ P-09 (may require fitting due to a variance in dovetail dimensions) CZ PCR (there will be a gap under the front of the adapter plate) Tristar P120
Uutiskirje