Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

W. FREAR INNOVATIONS
COLLIMATOR ELEVATOR

100002512
Adapts Your Collimator For Use With Large Objective Optics
Precision-manufactured device greatly extends the use and range of your optical collimator for rifles equipped with large objective scopes or scopes mounted in rings high above the centerline of the bore. Very easy to use: Mount your collimator onto the elevation arm, insert your bore spud in the elevator block, then lock with thumbscrew. Insert your spud into the bore and move elevation shaft up or down. Adjust the collimator so its grid view is near the center of the objective lens, and lock collimator height with second thumbscrew.

NOTE: Can be used with any bore spud or arbor 1/2" or smaller to include expandable arbors.

SPECS: Elevator Block - Aluminum. 1¾" (4.5cm) long, ¾"(1.9cm) wide, 1¾" high. Elevation Shaft - Stainless steel. ¼" (6.3mm) diameter. Elevation Arm - Aluminum. 3⁄8" (9.5mm) diameter. Includes instructions. Can be used with any bore spud or arbor 1/2" OD or smaller to include expandable arbors.

134.9 134.9 1 EUR
Tuotenro: 100002512
W. FREAR INNOVATIONS COLLIMATOR ELEVATOR
Valmistajan tuotenumero: COLLELEV Tarkasti valmistettu laite laajentaa merkittävästi optisen kollimaattorisi käyttöaluetta ja mahdollisuuksia kivääreissä, joissa on suuret etäisyydet kattavat tähtäimet tai tähtäimet, jotka on kiinnitetty renkaisiin kaukana piipun keskilinjasta. Erittäin helppokäyttöinen: Kiinnitä kollimaattorisi nostoarmeihin, aseta porauspuikkosi nostopalikkaan ja lukitse peukaloruuvilla. Aseta puikkosi piippuun ja liikuta nostovartta ylös tai alas. Säädä kollimaattorin ruudukkonäkymä lähelle objektiivin linssin keskustaa ja lukitse kollimaattorin korkeus toisella peukaloruuvilla.
134.9 EUR 0 134,90 € *
Ilmoita saatavuudesta
Ei saatavilla.

Ominaisuudet

Toimituksen paino: 0,113kg Toimituksen korkeus: 5mm Toimituksen leveys: 58mm Toimituksen pituus: 152mm

Tuotekuvaus

Made in USA




Adapts Your Collimator For Use With Large Objective Optics
Precision-manufactured device greatly extends the use and range of your optical collimator for rifles equipped with large objective scopes or scopes mounted in rings high above the centerline of the bore. Very easy to use: Mount your collimator onto the elevation arm, insert your bore spud in the elevator block, then lock with thumbscrew. Insert your spud into the bore and move elevation shaft up or down. Adjust the collimator so its grid view is near the center of the objective lens, and lock collimator height with second thumbscrew.

NOTE: Can be used with any bore spud or arbor 1/2" or smaller to include expandable arbors.

SPECS: Elevator Block - Aluminum. 1¾" (4.5cm) long, ¾"(1.9cm) wide, 1¾" high. Elevation Shaft - Stainless steel. ¼" (6.3mm) diameter. Elevation Arm - Aluminum. 3⁄8" (9.5mm) diameter. Includes instructions. Can be used with any bore spud or arbor 1/2" OD or smaller to include expandable arbors.

Uutiskirje