Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi
100500405
Build Your CETME Without a Press
The Hill & Mac Gunworks CETME Steel Bending Jig Kit allows gun builders to form their CETME rifle receiver flats into complete receivers. The kit does not require end users to have a press in order to use the jig. The Hill & Mac Gunworks CETME Steel Bending Jig Kit can be used to build both CETME Model L and Model LC rifle receivers. To use the jig, owners can imply insert a receiver flat and tighten down the 1/2-inch bolts included with the kit in order to form the receiver flat into a complete receiver. Jig kit does not include receiver flat and HMG Weldment Kit needed for rifle assembly Required 922r compliance parts are not included with the kit and can be purchased separately Jig can be used to assemble CETME Model L and Model LC rifle receivers Owners of the Hill & Mac Gunworks CETME Steel Bending Jig Kit can use the kit to assemble multiple rifle receivers with the same jig.
284.9 284.9 1 EUR
Tuotenro: 100500405
HILL & MAC GUNWORKS CETME BENDING JIG KIT STEEL
Valmistajan tuotenumero: RC990031 Hill & Mac Gunworksin CETME Steel Bending Jig Kit mahdollistaa aseiden rakentajille CETME-kiväärin vastaanottimen litteiden muotoilemisen valmiiksi vastaanottimiksi. Sarja ei vaadi käyttäjiltä prässiä sorvin käyttöön. Hill & Mac Gunworksin CETME Steel Bending Jig Kitillä voi rakentaa sekä CETME-mallin L että LC -kiväärin vastaanottimia. Sorvin käyttöön omistajien tulee vain asettaa vastaanottimen litteä paikalleen ja kiristää mukana tulevat 1/2-tuumaiset pultit, jotta vastaanotin muotoutuu valmiiksi. Jig-sarja ei sisällä vastaanottimen litteää eikä HMG Weldment Kit -sarjaa, jotka tarvitaan kiväärin kokoamiseen. Vaadittavat 922r-yhteensopivuusosat eivät sisälly sarjaan ja ne on hankittava erikseen. Sorvilla voi koota sekä CETME-mallin L että LC -kiväärin vastaanottimia. Hill & Mac Gunworksin CETME Steel Bending Jig Kitin omistajat voivat käyttää sarjaa usean kiväärin vastaanottimen kokoamiseen samalla sorvilla.
284.9 EUR 0 284,90 € *
Ilmoita saatavuudesta
Ei saatavilla.
Ominaisuudet: Malli: L Merkki: Cetme

Ominaisuudet

Malli: L Valmistaja: Cetme Toimituksen paino: 1,361kg Toimituksen korkeus: 165mm Toimituksen leveys: 165mm Toimituksen pituus: 305mm

Tuotekuvaus

Made in USA




Build Your CETME Without a Press
The Hill & Mac Gunworks CETME Steel Bending Jig Kit allows gun builders to form their CETME rifle receiver flats into complete receivers. The kit does not require end users to have a press in order to use the jig. The Hill & Mac Gunworks CETME Steel Bending Jig Kit can be used to build both CETME Model L and Model LC rifle receivers. To use the jig, owners can imply insert a receiver flat and tighten down the 1/2-inch bolts included with the kit in order to form the receiver flat into a complete receiver. Jig kit does not include receiver flat and HMG Weldment Kit needed for rifle assembly Required 922r compliance parts are not included with the kit and can be purchased separately Jig can be used to assemble CETME Model L and Model LC rifle receivers Owners of the Hill & Mac Gunworks CETME Steel Bending Jig Kit can use the kit to assemble multiple rifle receivers with the same jig.
Uutiskirje