Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

AREA 419
ARCALOCK MPA CHASSIS ATTACHMENT

853675008914 100032675
Area 419 is always looking for ways to improve existing products when we are not developing new technologies. With the rapid growth in popularity of ARCA rails in precision rifle, we saw a need to improve this great dovetail technology to something that could be mechanically locked in place instead of just friction.  If you have ever tried using a Barricade stop on an existing ARCA rail, you’ve probably also seen it slide under much pressure. Rail Features: Serrated rail sides interface with our proprietary clamp design to mechanically lock it in place so no movement is possible. Rail is 14″ long giving you the entire length of the stock forend for attachments.  65 Engraved positions Fits the MPA BA and BA Comp chassis at a minimum, may also fit the Hybrid  **Will not fit Lite** Spigot supports front of rail, but rail will work even if you do not have the MPA spigot, you may just see a small amount of flex with bipod fully forward Access to recoil lug wedge is not obstructed Made to the RRS 1.5″ Dovetail Standard, so you can be sure lever clamps will work No sharp edges. Every corner is radiused, and every edge is chamfered on the machine. Type 3 Hard Coat anodized for additional durability. Made from 6061-T6 Aluminum Rail comes with all necessary hardware  
164.9 164.9 1 EUR
Tuotenro: 100032675
AREA 419 ARCALOCK 14" ARCA SWISS RAIL FOR MPA CHASSIS
Valmistajan tuotenumero: 419ALKMPA14 853675008914 Area 419 pyrkii aina parantamaan olemassa olevia tuotteitaan, kun emme kehitä uusia teknologioita. ARCA-kiskojen suosion nopean kasvun myötä tarkkuuskivääreissä näimme tarpeen parantaa tätä loistavaa urateknologiaa joksikin, joka voitaisiin mekaanisesti lukita paikalleen sen sijaan, että se pysyisi paikallaan vain kitkan avulla. Jos olet koskaan yrittänyt käyttää Barricade-stoppia olemassa olevassa ARCA-kiskossa, olet todennäköisesti nähnyt sen liukuvan suuren paineen alla. Kiskon ominaisuudet: Uratut kiskon sivut liittyvät yhteen omaan patentoidun puristusdesignimme kanssa, joka lukitsee sen mekaanisesti paikalleen niin, että liikkuminen ei ole mahdollista. Kisko on 14 tuumaa pitkä antaen sinulle koko tukin etupään kiinnikkeitä varten. 65 kaiverrettua asemaa Sopii vähintään MPA BA ja BA Comp -runkoihin, saattaa sopia myös Hybrid-malliin **Ei sovi Lite-malliin** Spigot tukee kiskon etuosaa, mutta kisko toimii, vaikka sinulla ei olisi MPA spigotia, saatat vain nähdä pienen määrän taipumista, kun kaksijalka on täysin eteenpäin Työntöpultin kiilaan pääsy ei ole estynyt Valmistettu RRS 1.5 tuuman urastandardin mukaisesti, joten voit olla varma, että vipukiristimet toimivat Ei teräviä reunoja. Jokainen kulma on pyöristetty ja joka reuna on viistetty koneella. Tyyppi 3 Kova anodisointi lisää kestävyyttä. Valmistettu 6061-T6 alumiinista Kisko tulee kaikkien tarvittavien tarvikkeiden kanssa
164.9 EUR 1 164,90 € *
Toimitusaika noin 2-4 viikkoa.
1 kpl. USA:n varastossa
Ominaisuudet: Attachment: Adapter Mount

Ominaisuudet

Attachment: Adapter Mount Toimituksen paino: 0,299kg Toimituksen korkeus: 58mm Toimituksen leveys: 56mm Toimituksen pituus: 399mm

Tuotekuvaus

Made in USA



Area 419 is always looking for ways to improve existing products when we are not developing new technologies. With the rapid growth in popularity of ARCA rails in precision rifle, we saw a need to improve this great dovetail technology to something that could be mechanically locked in place instead of just friction.  If you have ever tried using a Barricade stop on an existing ARCA rail, you’ve probably also seen it slide under much pressure. Rail Features: Serrated rail sides interface with our proprietary clamp design to mechanically lock it in place so no movement is possible. Rail is 14″ long giving you the entire length of the stock forend for attachments.  65 Engraved positions Fits the MPA BA and BA Comp chassis at a minimum, may also fit the Hybrid  **Will not fit Lite** Spigot supports front of rail, but rail will work even if you do not have the MPA spigot, you may just see a small amount of flex with bipod fully forward Access to recoil lug wedge is not obstructed Made to the RRS 1.5″ Dovetail Standard, so you can be sure lever clamps will work No sharp edges. Every corner is radiused, and every edge is chamfered on the machine. Type 3 Hard Coat anodized for additional durability. Made from 6061-T6 Aluminum Rail comes with all necessary hardware  
Uutiskirje