Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

AMERICAN DEFENSE MANUFACTURING
AIMPOINT LOW PROFILE MOUNT

818503010088 100003652
Quick-release lever-lock system clamps solidly to flattop rail and will not work loose even under heavy recoil—the more force acting on the lever, the tighter it locks. Depress the release tab to swing the lever open, and the mount easily lifts off the rifle. Adjustable with a flat head screwdriver or even a coin for an ultra-secure, no-slip fit on almost any Picatinny or Weaver-style rail, including over- or under-sized commercial rails. Lever may be configured to lock to the front or the rear to suit the operator’s preference. Large locking bar on the side of the mount engages the maximum amount of rail area, while the crossbolt and two integral locking lugs ensure rock-solid engagement of rail slots to prevent movement under recoil. Five heavy duty steel hex head screws (three on top, two on bottom) clamp the vertically split ring halves together. Cutouts in the ring sides and in the base reduce weight without sacrificing strength. AD-68 Aimpoint Mount is designed for Aimpoint optics or similar aiming devices requiring a single, 30mm ring, including the Comp C3 and M2/ML2/M3/ML3 series. Available in four configurations to suit a variety of mounting needs. Low positions the scope as close as possible to the top of the receiver.

SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Height measured from top of rail to bottom of scope body. Low - .520” high.

259.9 259.9 1 EUR
Tuotenro: 100003652
AMERICAN DEFENSE MANUFACTURING AIMPOINT LOW PROFILE MOUNT
Valmistajan tuotenumero: AD68LSTD 818503010088 Pikavapautuslevyn lukitusjärjestelmä kiinnittyy tukevasti flattop-kiskoon eikä löysty edes voimakkaan rekyylin alaisena – mitä enemmän voimaa vaikuttaa vipuun, sitä tiukemmin se lukittuu. Painamalla vapautustappia vipu avautuu, ja jalusta nousee helposti pois kiväärin päältä. Säädettävissä litteällä ruuvimeisselillä tai jopa kolikolla erittäin varmalle, liukumattomalle istuvuudelle lähes kaikilla Picatinny- tai Weaver-tyylisillä kiskoilla, mukaan lukien yli- tai alimitoitetut kaupalliset kiskot. Vipu voidaan konfiguroida lukittumaan eteen tai taakse käyttäjän mieltymyksen mukaan. Suuri lukitustanko jalustan sivulla tarttuu maksimaaliseen määrään kiskoaluetta, kun taas poikittainen pultti ja kaksi integroitua lukitusnastaa takaavat kiskourien kallionkovaa kiinnitystä estäen liikkeen rekyylin aikana. Viisi kestävää teräksistä kuusiokantaista ruuvia (kolme yläpuolella, kaksi alapuolella) kiristävät vertikaalisesti jaettujen renkaiden puoliskot yhteen. Renkaiden sivuissa ja jalustan pohjassa olevat aukot vähentävät painoa tinkimättä lujuudesta. AD-68 Aimpoint Mount on suunniteltu Aimpoint-tähtäimiä tai vastaavia, yhtä 30mm rengasta vaativia tähtäyslaitteita varten, mukaan lukien Comp C3 ja M2/ML2/M3/ML3 -sarjat. Saatavilla neljässä eri konfiguraatiossa erilaisiin asennustarpeisiin. Matala asetus sijoittaa tähtäimen niin lähelle vastaanottimen päälliosaa kuin mahdollista.
259.9 EUR 1 259,90 € *
Toimitusaika noin 2-4 viikkoa.
1 kpl. USA:n varastossa
Ominaisuudet: Jalustojen lukumäärä: 1-Piece Koko: Low Korkeus: .520'' Merkki: AR-15 Runkoputken halkaisija: 30mm Tyyppi: Low Profile Viimeistely: Black Väri: Matte Black

Ominaisuudet

Jalustojen lukumäärä: 1-Piece Koko: Low Korkeus: .520'' Runkoputken halkaisija: 30mm Tyyli: Low Profile Valmistaja: AR-15 Viimeistely: Black Väri: Matte Black Toimituksen paino: 0,159kg Toimituksen korkeus: 64mm Toimituksen leveys: 89mm Toimituksen pituus: 145mm

Tuotekuvaus

Made in USA




Quick-release lever-lock system clamps solidly to flattop rail and will not work loose even under heavy recoil—the more force acting on the lever, the tighter it locks. Depress the release tab to swing the lever open, and the mount easily lifts off the rifle. Adjustable with a flat head screwdriver or even a coin for an ultra-secure, no-slip fit on almost any Picatinny or Weaver-style rail, including over- or under-sized commercial rails. Lever may be configured to lock to the front or the rear to suit the operator’s preference. Large locking bar on the side of the mount engages the maximum amount of rail area, while the crossbolt and two integral locking lugs ensure rock-solid engagement of rail slots to prevent movement under recoil. Five heavy duty steel hex head screws (three on top, two on bottom) clamp the vertically split ring halves together. Cutouts in the ring sides and in the base reduce weight without sacrificing strength. AD-68 Aimpoint Mount is designed for Aimpoint optics or similar aiming devices requiring a single, 30mm ring, including the Comp C3 and M2/ML2/M3/ML3 series. Available in four configurations to suit a variety of mounting needs. Low positions the scope as close as possible to the top of the receiver.

SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Height measured from top of rail to bottom of scope body. Low - .520” high.

Uutiskirje