Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

TCS
AR-15 BORE GUIDE

689466565539 100020861
The TCS AR-15 Bore Guide may be the single most important cleaning tool for preserving the long term accuracy of your firearm.  This tool keeps the cleaning rod perfectly straight so that it can not make contact with the sides of your barrel.  To use this tool, simply remove the upper of your AR-15 style rifle and then pull the charging handle back and remove the bolt carrier group.  Insert the bore guide into the upper, where the bolt carrier group would normally go. Center a patch treated with TCS Bore Paste on the back of the bore guide.  Using a TCS Bore Jag on a TCS Rod, press the patch through the bore guide and into the bore.  Repeat with TCS Solvent. This fine tool is made with pride in the USA. Fits most AR-15, M-16 style rifles in 223/5.56 Anodized Aluminum Rubber O-Rings
64.9 64.9 1 EUR
Tuotenro: 100020861
TCS AR-15 BORE GUIDE
Valmistajan tuotenumero: BGAR15 689466565539 TCS AR-15 Bore Guide voi olla yksi tärkeimmistä puhdistustyökaluista aseesi pitkäaikaisen tarkkuuden säilyttämiseksi. Tämä työkalu pitää puhdistuspuikon täydellisesti suorassa, jotta se ei voi koskettaa piipun sivuja. Työkalun käyttämiseksi poista ensin AR-15-tyylisen kiväärin yläosa ja vedä sitten latauskahva taakse ja poista lukonkantajaryhmä. Aseta puhdistusopas yläosaan, siihen kohtaan, johon lukonkantajaryhmä normaalisti sijoitetaan. Keskelle puhdistusopasta asetetaan TCS Bore Pastella käsitelty puhdistuslappu. Käyttäen TCS Bore Jagia TCS Rodilla, paina puhdistuslappu puhdistusoppaan kautta piippuun. Toista toimenpide TCS Solventilla. Tämä hieno työkalu on valmistettu ylpeydellä Yhdysvalloissa. Sopii useimpiin AR-15, M-16-tyylisiin kivääreihin kaliberissa 223/5.56 Anodisoitu alumiini Kumitiivisterenkaat
64.9 EUR 3 64,90 € *
Toimitusaika noin 2-4 viikkoa.
3 kpl. USA:n varastossa
Ominaisuudet: Merkki: AR-15 Patruuna: 22 Caliber (.223-.224)

Top takeaways

  1. TCS AR-15 Bore Guide pitää puhdistuspuikon suorassa, estäen sen koskettamasta piipun sivuja.
  2. Työkalu sopii useimpiin AR-15, M-16-tyylisiin kivääreihin kaliberissa 223/5.56 ja on valmistettu anodisoidusta alumiinista kumitiivisterenkailla.
  3. Valmistettu ylpeydellä Yhdysvalloissa ja käytettävä yhdessä TCS Bore Pasten ja TCS Solventin kanssa.

Ominaisuudet

Patruuna: 22 Caliber (.223-.224) Valmistaja: AR-15 Toimituksen paino: 0,1kg Toimituksen korkeus: 25mm Toimituksen leveys: 89mm Toimituksen pituus: 394mm

Tuotekuvaus

Made in USA




TCS AR-15 Bore Guide pitää puhdistuspuikon suorassa ja parantaa aseesi tarkkuutta. Sopii AR-15 ja M-16 kivääreihin. Valmistettu USA:ssa 🇺🇸. Osta nyt!

The TCS AR-15 Bore Guide may be the single most important cleaning tool for preserving the long term accuracy of your firearm.  This tool keeps the cleaning rod perfectly straight so that it can not make contact with the sides of your barrel.  To use this tool, simply remove the upper of your AR-15 style rifle and then pull the charging handle back and remove the bolt carrier group.  Insert the bore guide into the upper, where the bolt carrier group would normally go. Center a patch treated with TCS Bore Paste on the back of the bore guide.  Using a TCS Bore Jag on a TCS Rod, press the patch through the bore guide and into the bore.  Repeat with TCS Solvent. This fine tool is made with pride in the USA. Fits most AR-15, M-16 style rifles in 223/5.56 Anodized Aluminum Rubber O-Rings
Varastossa
69,90 € * 29,90 € - 69,90 €*
0
Uutiskirje