Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

EGW
S&W M&P 22 COMPACT VORTEX RAZOR SIGHT MOUNT

841370115907 296000706
Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Vortex Razor, C-More RTS or STS red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs The screws that are included with this mount require a 5/64'' allen wrench for installation.
84.9 84.9 1 EUR
Tuotenro: 296000706
EGW SIGHT MOUNT FOR VORTEX RAZOR FITS S&W M&P 22 COMPACT BLACK
Valmistajan tuotenumero: 49454 841370115907 Poista vain aseen takatähtäin ja korvaa se EGW:n kiinnikkeellä asentaaksesi Vortex Razorin, C-More RTS:n tai STS:n punapistetähtäimen. Voit milloin tahansa ottaa kiinnikkeen pois ja vaihtaa takatähtäimen takaisin. Kiinnitystarvikkeet sisältyvät pakkaukseen. Asennusohjeet: Poista takatähtäin* Asenna EGW:n tähtäinkisko uraan Kiristä asetuspultti (jos sovellettavissa) Aseta punapistetähtäin EGW:n tähtäinkiskoon (punapistetähtäimen ja tähtäinkiskon väliin asetettu pieni paperinpala helpottaa irrottamista ja pitää Loctiten poissa punapistetähtäimestä.) Levitä sinistä Loctitea mukana toimitettuihin kiinnitysruuveihin Kiristä kiinnitysruuvit 15 tuumaan/paunaan Mukana tulevat ruuvit vaativat 5/64 tuuman kuusiokoloavainta asennukseen.
84.9 EUR 1 84,90 € *
Toimitusaika noin 2-4 viikkoa.
1 kpl. USA:n varastossa
Ominaisuudet: Jalustojen lukumäärä: 1-Piece Malli: M&P 22 Materiaali: Aluminum Merkki: Smith & Wesson Tyyppi: Tactical Väri: Black

Ominaisuudet

Jalustojen lukumäärä: 1-Piece Malli: M&P 22 Materiaali: Aluminum Tyyli: Tactical Valmistaja: Smith & Wesson Väri: Black Toimituksen paino: 0,045kg Toimituksen korkeus: 25mm Toimituksen leveys: 76mm Toimituksen pituus: 140mm

Tuotekuvaus

Made in USA



Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Vortex Razor, C-More RTS or STS red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs The screws that are included with this mount require a 5/64'' allen wrench for installation.
Uutiskirje