Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepÀn työkaluja ja optiikkaa Suomi

EGW
SIG SAUER P220 10MM HUNTER VORTEX RAZOR SIGHT MOUNT

841370117055 296000558
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.831" Overall Width: 1.062" Mounting Hardware: (2) 8-32 Button Head Screws, (1) 8-32 Set Screw) Red Dot Fitment: Vortex Razor, C-More RTS & STS Simply remove the rear sight on your gun and replace it with our mount in order to mount your Vortex Razor, C-More RTS or STS red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs
74.9 74.9 1 EUR
Tuotenro: 296000558
EGW SIG SAUER P220 10MM HUNTER VORTEX RAZOR SIGHT MOUNT
Valmistajan tuotenumero: 49463 841370117055 Materiaali: 7075 Alumiini Pinnoite: Mattamusta kova pinnoite Kokonaispituus: 1.831" Kokonaisleveys: 1.062" Kiinnitystarvikkeet: (2) 8-32 PyöreÀkantaruuvit, (1) 8-32 Asetusruuvi) PunapistetÀhtÀimen yhteensopivuus: Vortex Razor, C-More RTS & STS Poista vain aseen takatÀhtÀin ja korvaa se meidÀn kiinnikkeellÀmme, jotta voit asentaa Vortex Razor, C-More RTS tai STS punapistetÀhtÀimen. Aseen muutoksia ei tarvita. Voit milloin tahansa ottaa kiinnikkeemme pois ja laittaa takatÀhtÀimen takaisin paikalleen. Kiinnitystarvikkeet sisÀltyvÀt toimitukseen. Asennusohjeet Poista takatÀhtÀin* Asenna EGW TÀhtÀinkisko jyvÀÀn KiristÀ asetusruuvi (jos sovellettavissa) Aseta punapistetÀhtÀin EGW TÀhtÀinkiskolle (punapistetÀhtÀimen ja tÀhtÀinkiskon vÀliin asetettu pieni paperinpala tekee poistamisesta helpompaa ja pitÀÀ Loctiten poissa punapistetÀhtÀimestÀ.) LevitÀ sinistÀ Loctitea mukana tulleisiin kiinnitysruuveihin KiristÀ kiinnitysruuvit 15in/lbs momenttiin
74.9 EUR 1 74,90 € *
Toimitusaika noin 2-4 viikkoa.
1 kpl. USA:n varastossa
Ominaisuudet: Jalustojen lukumÀÀrÀ: 1-Piece Malli: P220 Materiaali: Aluminum Merkki: Sig Sauer Tyyppi: Tactical VÀri: Black

Top takeaways

  1. EGW kiinnike mahdollistaa Vortex Razor, C-More RTS ja STS punapistetÀhtÀimien asennuksen ilman aseen muutoksia.
  2. Materiaali on 7075 alumiinia, ja pinnoite on mattamusta kova pinnoite.
  3. Kiinnitystarvikkeet ja asennusohjeet sisÀltyvÀt toimitukseen.

Ominaisuudet

Jalustojen lukumÀÀrÀ: 1-Piece Malli: P220 Materiaali: Aluminum Tyyli: Tactical Valmistaja: Sig Sauer VÀri: Black Toimituksen paino: 0,034kg Toimituksen korkeus: 25mm Toimituksen leveys: 89mm Toimituksen pituus: 140mm

Tuotekuvaus

Made in USA



đŸ”« Asenna Vortex Razor tai C-More RTS/ST punapistetĂ€htĂ€in SIG SAUER P220 10MM HUNTER -aseeseen helposti EGW-kiinnikkeellĂ€. Ei aseen muutoksia! 🚀 Lue lisÀÀ!

Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.831" Overall Width: 1.062" Mounting Hardware: (2) 8-32 Button Head Screws, (1) 8-32 Set Screw) Red Dot Fitment: Vortex Razor, C-More RTS & STS Simply remove the rear sight on your gun and replace it with our mount in order to mount your Vortex Razor, C-More RTS or STS red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs
Uutiskirje