Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi
815421025446 100034681
An Attachment Point for Your Aero Precision Handguard
Got your hands on an Aero Precision handguard you're looking to put onto your AR-15? Grab Aero Precision's AR-15 BAR Barrel Nut, designed specifically to interface with all of Aero Precison's Enhanced handguards when used for installation on a mil-spec, threaded upper receiver. This Aero Precision AR-15 BAR Barrel Nut is purpose-built for use with the company's M4E1 Enhanced Upper Receiver, but the nut will work with pretty much any mil-spec AR upper receiver on the market. Each barrel nut is machined from 7075-T6 aluminum and includes 4 shims to aid in installation. Total weight on the barrel nut is 2.24 ounces. INCLUDES: BAR Barrel Nut BAR Shim Pack (8 shims) FEATURES: Material: Machined from Billet 7075-T6 Aluminum Coating: Anodized Black Torque with standard AR15 armorer's wrench (Does not work with Magpul® Armorer's Wrench) Supports Mil-Spec AR-15 barrels with outer diameters up to .998” Please Note: All Aero Precision Handguards use the BAR interface. If you intend to connect an Aero Precision Handguard to a standard threaded upper receiver, you will need a Bar Barrel Nut. If you have Aero Precison's M4E1 Enhanced Upper Receiver, you do not need a BAR Barrel Nut as the barrel nut and rail mounting platform are forged directly on to the upper receiver itself. *Recommended torque settings between 30 - 45 ft lbs. Torque over 45 ft lbs may result in damage to the barrel nut.
74.9 74.9 1 EUR
Tuotenro: 100034681
AERO PRECISION BAR BARREL NUT FOR AR-15 BLACK
Valmistajan tuotenumero: APRH100268 815421025446 Hankkinut Aero Precision -kädensijan, jonka haluat asentaa AR-15:een? Tartu yhtiön AR-15 BAR Barrel Nut -kiinnitysmutteriin, joka on suunniteltu erityisesti käytettäväksi kaikkien yhtiön Enhanced-kädensijojen kanssa asennettaessa vakiomitoitetun, kierteisen ylävastaanottimen kanssa. Tämä Aero Precisionin AR-15 BAR Barrel Nut on tarkoitettu käytettäväksi yhtiön M4E1 Enhanced Upper Receiver -ylävastaanottimen kanssa, mutta mutteri toimii melkein minkä tahansa vakiomitoitetun AR-ylävastaanottimen kanssa markkinoilla. Jokainen kiinnitysmutteri on koneistettu 7075-T6-alumiinista ja pakettiin sisältyy 4 shimmiä asennuksen avuksi. Kiinnitysmutterin kokonaispaino on 2.24 unssia.
74.9 EUR 0 74,90 € *
Jälkitilaus, toimitusaika n. 4-12 viikkoa USA:n varastosta.
Ominaisuudet: Materiaali: Aluminum Merkki: AR-15 Väri: Black

Ominaisuudet

Materiaali: Aluminum Valmistaja: AR-15 Väri: Black Toimituksen paino: 0,24kg Toimituksen korkeus: 76mm Toimituksen leveys: 76mm Toimituksen pituus: 76mm

Tuotekuvaus

Made in USA



An Attachment Point for Your Aero Precision Handguard
Got your hands on an Aero Precision handguard you're looking to put onto your AR-15? Grab Aero Precision's AR-15 BAR Barrel Nut, designed specifically to interface with all of Aero Precison's Enhanced handguards when used for installation on a mil-spec, threaded upper receiver. This Aero Precision AR-15 BAR Barrel Nut is purpose-built for use with the company's M4E1 Enhanced Upper Receiver, but the nut will work with pretty much any mil-spec AR upper receiver on the market. Each barrel nut is machined from 7075-T6 aluminum and includes 4 shims to aid in installation. Total weight on the barrel nut is 2.24 ounces. INCLUDES: BAR Barrel Nut BAR Shim Pack (8 shims) FEATURES: Material: Machined from Billet 7075-T6 Aluminum Coating: Anodized Black Torque with standard AR15 armorer's wrench (Does not work with Magpul® Armorer's Wrench) Supports Mil-Spec AR-15 barrels with outer diameters up to .998” Please Note: All Aero Precision Handguards use the BAR interface. If you intend to connect an Aero Precision Handguard to a standard threaded upper receiver, you will need a Bar Barrel Nut. If you have Aero Precison's M4E1 Enhanced Upper Receiver, you do not need a BAR Barrel Nut as the barrel nut and rail mounting platform are forged directly on to the upper receiver itself. *Recommended torque settings between 30 - 45 ft lbs. Torque over 45 ft lbs may result in damage to the barrel nut.
Uutiskirje