Korisi on tyhjä.

Ostoskori

STRIKE INDUSTRIES
AK:N PERÄADAPTERI AR-15 BUFFERTUUBILLE

700598350463 100016868

Strike Industries stock adapter allows for the replacement of any standard fixed AK stock to be converted to accept an AR buffer tube assembly. This adapter is easy to install without any modifications to your AK. With no need to permanently alter the stock tang as it fits inside the adapter and tube. This product will take your AK into the twenty first century with the looks and the adjust-ability of a M4. Strike Industries also incorporated QD (quick disconnects) on both sides of the AK stock adapter.

SPECS: Length: 2.5", Weight: 4oz, Material: T6061 Aluminum.

Lisää...

Sopii prässättyihin AK:hin, ei välttämättä sovi Norincoon.

Tiedot: pituus: 2,5", paino: 4oz, materiaali: T6061 alumiini.

Lisää...

Asiakasarviot: AK:n peräadapteri AR buffertuubille, musta alumiini

Arvioiden lukumäärä: 5
Arvostelut brownells.com sivustolla: 5
Arvioiden keskiarvo: 3,8

does not fit (29.5.2015)

Sturdy design, but does not even come close to fitting C39V2 rifle from century

Fits Great - FOR STAMPED AK's ONLY! (3.6.2015)

The review below me tried fitting it on a milled AK (C39v2). The Brownells video states it's for STAMPED AK's only. Fit well on my DDI stamped AK.

Worth getting to modify your AK (5.9.2015)

I received the product 3 days before it was schedule to arrive, so my 'hats off' to Brownells for their speed of processing delivery. The part fit into my Warsa 10/63 lower receiver without any problems. It is made of the same strong material used in a lot of today's AR's, and the location for the QD attachments is where I like them to be. With the stock fully collapsed, it is a half inch shorter than the standard AK stock, fully extended it is as long as an A2 stock for those that like the longer length of pull.

The only 2 issue's I did have was; (1) the lack of a proper fitting allen key tool to set the lock screw for the buffer tube and the two mounting screws, (2) I had to use a sanding wheel to grind down the edge of the mounting screw that went under the recoil spring/ locking latch for the dust cover to get it to fit flush with the surface and have everything mount properly back into place on the receiver. Other than those two minor issues, this is a great product for anyone who wants to mount an AR collapsible butt stock to their AK 47/74 rifle's. I would have given it 5 stars instead of 4, if it was not for having to do a little work when I was installing the part.

So far, so good (25.10.2015)

I researched this item and went back and forth between it and the rifle dynamics version. This one is half price and when "chatting" with the Brownell's rep, he said I could return it if didn't work out. Well, I figured that was worth a try. The unit fit well on my Saiga with some minor fitting of the mounting screw (filing). However, there are no directions and there are two pieces that fit inside the adapter that I truly don't know what their purpose is. That said, it fit well and looks good. I put a Magpul MOE stock on the AK. The length of the stock with the adapter is outstanding. Time will tell as to durability, but so far I'm very happy.

Exellent product, but... (16.2.2018)

Excellent adapter, very well made.

The best if you plan on using the iron sights as the tube comes lower then on any other similar adapters.

Only caveat is that requires quite a LOT of fitting to install on Norinco; the receiver of T56 is made of 1.5 mm steel compared to most East Block AKs where the material is 1 mm â so the inner diameter is smaller then on most models.

Also, the Chinese tang is about 6 mm longer then standard, so the holes do not fit (see the pic â after taking it, I ended up filing the rear tang hole so it aligns with the hole on the adapter)

I filed the sides and the "forehead" of the part of the adapter that goes inside the receiver, and filed the rear tang screw hole some â now it fits tight and very solid, even without the adjustment pieces.

<img width="500" src='/userdocs/reviewimages/c70e0c1a-d3be-4dee-9d83-9353443560d7.jpg' alt=''>

Lue 5 arvostelua lisää brownells.com sivustolla

59.9 59.9 1 EUR

Tuotenro: 100016868
AK:n peräadapteri AR buffertuubille, musta alumiini
Valmistajan tuotenumero: SIAKSA 700598350463 Sopii prässättyihin AK:hin, ei välttämättä sovi Norincoon. Sopii prässättyihin AK:hin, ei välttämättä sovi Norincoon.

59.9 EUR 3 59,90 € *

Toimitusaika noin 2-4 viikkoa.
3 kpl. USA:n varastossa

Ominaisuudet: Materiaali: Aluminum Viimeistely: Black

Lisää toivelistaan

Kysy tuotteesta

Tiedot

Lisää toivelistaan

Kysy tuotteesta

Ominaisuudet

Materiaali: Aluminum Viimeistely: Black Toimituksen paino: 0,125kg Toimituksen korkeus: 44mm Toimituksen leveys: 44mm Toimituksen pituus: 70mm

Tuotekuvaus

USA:n vientiluvan tyyppi: 0A501.y.1

SPECS: Length: 2.5", Weight: 4oz, Material: T6061 Aluminum.

Lisää...

Sopii prässättyihin AK:hin, ei välttämättä sovi Norincoon.

Tiedot: pituus: 2,5", paino: 4oz, materiaali: T6061 alumiini.

Lisää...

Asiakasarviot: AK:n peräadapteri AR buffertuubille, musta alumiini

Arvioiden lukumäärä: 5
Arvostelut brownells.com sivustolla: 5
Arvioiden keskiarvo: 3,8

does not fit (29.5.2015)

Sturdy design, but does not even come close to fitting C39V2 rifle from century

Fits Great - FOR STAMPED AK's ONLY! (3.6.2015)

The review below me tried fitting it on a milled AK (C39v2). The Brownells video states it's for STAMPED AK's only. Fit well on my DDI stamped AK.

Worth getting to modify your AK (5.9.2015)

So far, so good (25.10.2015)

Exellent product, but... (16.2.2018)

Lue 5 arvostelua lisää brownells.com sivustolla

Muut ostivat

D.S. ARMS RECEIVER EXTENSION TUBE
AR-15/M16 MIL-SPEC BUFFER TUBE

D.S. ARMS

Voi laittaa jälkitilaukseen

33,90 € *

Bufferituubit

4,2

SIERRA BULLETS 22 CALIBER (0.223") 40GR SOFT POINT 100/BOX
VARMINTER LUODIT

SIERRA BULLETS

Ei saatavilla

41,90 € * 41,90 € - 42,90 €*

Kiväärin luodit

MANSON PRECISION RIMLESS PISTOL CARTRIDGE, .45 ACP FINISHER
RIMLESS PISTOL CARTRIDGES

MANSON PRECISION

Voi laittaa jälkitilaukseen

229,90 € * 139,90 € - 254,90 €*

Keskisytytteisten kalvaimet

BRAVO COMPANY AR-15/M16/M4 STOCK HARDWEAR MOUNTING KIT, MIL-SPEC
AR-15/M16 MIL-SPEC BUFFER TUBE ASSEMBLY

BRAVO COMPANY

Varastossa

99,90 € *

Bufferituubit

4,3

BROWNELLS AR-15 BRAVO SOPMOD STOCK ASSY COLLAPSIBLE MIL-SPEC BLK
AR-15 BRAVO SOPMOD STOCK ASSY COLLAPSIBLE MIL-SPEC

BROWNELLS

Varastossa

179,90 € *

Takatukit

Kirjaudu sisään

Unohditko salasanasi?
Rekisteröidy

Some

Sivuillamme

Tuoteryhmät

Tilaaminen

Asiakaspalvelu

Tervetuloa!

Tervetuloa brownells.fi sivustolle. Meillä on Suomen laajin valikoima asesepän tarvikkeita ja työkaluja, aseiden osia, jälleenlatausvälineitä, luoteja, hylsyjä, ammuntavarusteita, optiikkaa ja paljon muuta. Kymmenien tuhansien tuotteiden varasto, josta voit valita itsellesi sopivimmat tuotteet, olitpa sitten ampuja, metsästäjä tai aseseppä.

Tietoa meistä

Ampujat, metsästäjät, asesepät, aseharrastajat ja aseita työssään käyttävät ovat aina voineet kääntyä Brownellsin puoleen etsiessään korkealaatuisia tuotteita, osia, työkaluja, lataustarvikkeita, optiikkaa tai muuta aseisiin liittyvää. Meillä on aina 100% tyytyväisyystakuu!