Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

WHIDDEN GUNWORKS
Whidden Bullet Pointing Sleeve

749011845
John Whidden has won two Long Range Championship’s at Camp Perry using bullets pointed in this die system. The Whidden Pointing Die System is designed to profile the tips of jacketed bullets to reduce drag and improve BC. Testing has shown that shooters will see pointed bullets shoot ¾ to 1 MOA flatter at 1000 yards, with wind drift improvement of about 5%. The Whidden system works like a regular reloading die in a standard press (including the Forster Co-Ax) and uses caliber specific sleeves to change bullet calibers. Pointing bullets can be done just as fast as sizing brass. Extensive testing has also shown that light meplat trimming after pointing produces the maximum possible BC consistency. Order the tool and a bullet pointing sleeve for the caliber you choose to point. Order additional sleeves to change calibers. Full instructions are included.
84.9 84.9 1 EUR
Tuotenro: 749011845
WHIDDEN GUNWORKS 338 CALIBER BULLET POINTING SLEEVE
Valmistajan tuotenumero: PDS-0-0-000338- John Whidden on voittanut kaksi Long Range Championship -mestaruutta Camp Perryn kisoissa käyttäen tässä puristimessa muotoiltuja luoteja. Whidden Pointing Die System on suunniteltu profiloimaan päällystettyjen luotien kärkiä vähentämään ilmanvastusta ja parantamaan BC:tä (ballistista kerrointa). Testit ovat osoittaneet, että ampujat näkevät muotoiltujen luotien lentävän ¾–1 MOA tasaisemmin 1000 jaardin matkalla, ja tuulen aiheuttama poikkeama parantuu noin 5 %. Whidden-järjestelmä toimii kuten tavallinen latauspuristin standardipuristimessa (mukaan lukien Forster Co-Ax) ja käyttää kaliiperikohtaisia holkkeja luotien kaliiperin vaihtamiseen. Luotien muotoilu voidaan tehdä yhtä nopeasti kuin hylsyjen kokoonpuristaminen. Laaja testaus on myös osoittanut, että kevyt meplat-trimmaus muotoilun jälkeen tuottaa maksimaalisen mahdollisen BC-johdonmukaisuuden. Tilaa työkalu ja luodin muotoiluholkki valitsemallesi kaliiperille. Tilaa lisäholkkeja kaliiperin vaihtamiseen. Pakkauksessa on mukana täydelliset ohjeet.
84.9 EUR 1 84,90 € *
Toimitusaika noin 2-4 viikkoa.
1 kpl. USA:n varastossa
Ominaisuudet: Kaliiperi: 338 Caliber (.338)

Ominaisuudet

Kaliiperi: 338 Caliber (.338) Toimituksen paino: 0,023kg Toimituksen korkeus: 1mm Toimituksen leveys: 57mm Toimituksen pituus: 89mm

Tuotekuvaus

Made in USA



John Whidden has won two Long Range Championship’s at Camp Perry using bullets pointed in this die system. The Whidden Pointing Die System is designed to profile the tips of jacketed bullets to reduce drag and improve BC. Testing has shown that shooters will see pointed bullets shoot ¾ to 1 MOA flatter at 1000 yards, with wind drift improvement of about 5%. The Whidden system works like a regular reloading die in a standard press (including the Forster Co-Ax) and uses caliber specific sleeves to change bullet calibers. Pointing bullets can be done just as fast as sizing brass. Extensive testing has also shown that light meplat trimming after pointing produces the maximum possible BC consistency. Order the tool and a bullet pointing sleeve for the caliber you choose to point. Order additional sleeves to change calibers. Full instructions are included.
Uutiskirje