Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

BROWNELLS
TACTICAL SHOTGUN FIELD MAINTENANCE PACK

080000583
Complete, Dedicated Tool Kit For Maintenance & Repair Of Law Enforcement Shotguns
Compact, go-anywhere kit contains all the essential tools needed to disassemble, maintain, and repair today’s common tactical and law enforcement shotguns. Not a run-of-the-mill cleaning kit with generic tools, but a set of carefully selected, high-quality armorer tools designed to perform specific tasks on Benelli, Mossberg 500/590/835, and Remington 870/1100/11-87 shotguns. You’ll have the exact tool you need at your fingertips, without scrounging through a case full of tools for other guns or lugging around unnecessary weight. There’s a universal double-ended forend wrench for easy, non-slip removal of the forend nut without damage. Magazine tube pliers have adjustable, padded, curved jaws for easy removal of mag tubes and stuck magazine caps without marring the finish. T-handle driver comes with correct sockets for removing buttstock bolts, including a self-guiding, sleeved socket for the 870 and a socket for the new action spring tube nut on current-production Remington Model 11-87 Police shotguns (will also fit current 1100). Use the punch set with the brass/nylon head hammer and non-marring bench block to remove retaining pins while protecting the gun’s finish. The full-size #84 Magna-Tip screwdriver comes with the necessary interchangeable bits, including a 12-gauge shotgun choke tube wrench and an extra-long 3/16" Philips head bit for recoil pad screws. Our handy packing hook tool is indispensable for grasping, locating, or releasing springs and small parts. Plenty of compartments inside the water- and tear-resistant, 1000 denier Cordura case let you secure the tools to minimize unwanted shifting and noise. Quiet, #9 YKK nylon zippers with oversize pulls ensure fast, easy access to the tools. Front panel features a clear, I.D. card sleeve, loop strip for name tape, and ¾" wide, nylon grab handles for easy carry.

SPECS: Contains tools for working tactical/law enforcement models of Benelli, Mossberg 500/590/835, and Remington 870/1100/11-87 shotguns. Contents - Magna-Tip screwdriver handle with #210-5 and #270-5 slotted bits, 3⁄16" Philips bit, and Magna-Tip choke tube wrench; 12-gauge shotgun forend wrench; magazine tube/cap pliers; 3⁄8" socket drive, T-handle, and extension with ½” socket, drag link, Rem 870 buttstock bolt socket, and 11⁄16" socket for current-production Rem 1100/11-87 action spring tube nut; nylon/brass hammer; nylon bench block; 6” chain nose pliers; 1⁄16" and 3⁄32" starter punches and pin punches; packing hook; 12-gauge shotgun BoreSnake; ¼ oz. (7.4ml) and double-ended parts cleaning brush. Case - 1000 denier Cordura nylon, O.D. green. 11½” (29.2cm) long, 8½” (21.6cm) high, 3” (7.6cm) thick.

939.9 939.9 1 EUR
Tuotenro: 080000583
BROWNELLS TACTICAL SHOTGUN FIELD MAINTENANCE PACK Kompakti, mihin tahansa mahtuva sarja sisältää kaikki olennaiset työkalut, joita tarvitaan nykyaikaisten taktisten ja lainvalvonnan haulikoiden purkamiseen, huoltamiseen ja korjaamiseen. Ei mikään tavanomainen puhdistussarja yleisillä työkaluilla, vaan joukko huolellisesti valittuja, korkealaatuisia aseseppätyökaluja, jotka on suunniteltu erityisesti Benelli-, Mossberg 500/590/835- ja Remington 870/1100/11-87 -haulikoiden tehtäviin. Sinulla on aina käytössäsi juuri oikea työkalu, ilman tarvetta kaivella laukkua täynnä muita aseita varten tarkoitettuja työkaluja tai kantaa mukana tarpeetonta painoa. Setissä on universaali kaksipäinen tukin mutterin avain helppoon, liukumattomaan irrotukseen vahingoittamatta pintaa. Lippaan putkipihdit ovat säädettävät, pehmustetut ja kaarevat leukapihdit, jotka mahdollistavat lippaan putkien ja jumissa olevien lippaan korkkien helpon irrottamisen naarmuttamatta pintaa. T-kahvaväännin sisältää oikeat hylsyt perän ruuvien irrottamiseen, mukaan lukien itsensä ohjaava, holkilla varustettu hylsy 870:lle ja hylsy uuden toimintajousen putkimutterille nykytuotannon Remington Malli 11-87 Police -haulikoissa (sopii myös nykyiseen 1100-malliin). Käytä naskalisarjaa messinki/nylon-päisen vasaran ja naarmuuntumattoman työpöytälohkon kanssa säilytystappeja poistettaessa samalla aseen pintaa suojellen. Täysikokoinen #84 Magna-Tip -ruuvimeisseli sisältää tarvittavat vaihdettavat bitit, mukaan lukien 12-kaliiperisen haulikon supistajan avain ja ylimääräisen pitkän 3/16" Philips-pään bitin tukkapatruunoiden ruuveille. Kätevä pakkauskoukku on korvaamaton työkalu jousien ja pienten osien tarttumiseen, paikantamiseen tai vapauttamiseen. Veden- ja repeämisenkestävässä, 1000 denierin Cordura-laukussa on runsaasti lokeroita, joiden avulla voit varmistaa työkalujen paikallaan pysymisen minimoiden ei-toivotun liikkeen ja melun. Hiljaiset, #9 YKK-nylonvetoketjut ja suuret vetimet takaavat nopean ja helpon pääsyn työkaluihin. Etupaneelissa on kirkas, henkilökorttitasku, lenkkinauha nimilapulle ja ¾" leveät, nylonista valmistetut kantokahvat helppoon kantamiseen.
939.9 EUR 1 939,90 € *
Toimitusaika noin 2-4 viikkoa.
1 kpl. USA:n varastossa
Ominaisuudet: Malli: 11-87, 1100, 870, 500, 590, Universal Shotguns, 835 Merkki: Mossberg, Remington, Benelli

Ominaisuudet

Malli: 11-87,1100,500,590,835,870,Universal Shotguns Valmistaja: Benelli,Mossberg,Remington Toimituksen paino: 2,994kg Toimituksen korkeus: 762mm Toimituksen leveys: 284mm Toimituksen pituus: 404mm

Tuotekuvaus

Made in USA




Complete, Dedicated Tool Kit For Maintenance & Repair Of Law Enforcement Shotguns
Compact, go-anywhere kit contains all the essential tools needed to disassemble, maintain, and repair today’s common tactical and law enforcement shotguns. Not a run-of-the-mill cleaning kit with generic tools, but a set of carefully selected, high-quality armorer tools designed to perform specific tasks on Benelli, Mossberg 500/590/835, and Remington 870/1100/11-87 shotguns. You’ll have the exact tool you need at your fingertips, without scrounging through a case full of tools for other guns or lugging around unnecessary weight. There’s a universal double-ended forend wrench for easy, non-slip removal of the forend nut without damage. Magazine tube pliers have adjustable, padded, curved jaws for easy removal of mag tubes and stuck magazine caps without marring the finish. T-handle driver comes with correct sockets for removing buttstock bolts, including a self-guiding, sleeved socket for the 870 and a socket for the new action spring tube nut on current-production Remington Model 11-87 Police shotguns (will also fit current 1100). Use the punch set with the brass/nylon head hammer and non-marring bench block to remove retaining pins while protecting the gun’s finish. The full-size #84 Magna-Tip screwdriver comes with the necessary interchangeable bits, including a 12-gauge shotgun choke tube wrench and an extra-long 3/16" Philips head bit for recoil pad screws. Our handy packing hook tool is indispensable for grasping, locating, or releasing springs and small parts. Plenty of compartments inside the water- and tear-resistant, 1000 denier Cordura case let you secure the tools to minimize unwanted shifting and noise. Quiet, #9 YKK nylon zippers with oversize pulls ensure fast, easy access to the tools. Front panel features a clear, I.D. card sleeve, loop strip for name tape, and ¾" wide, nylon grab handles for easy carry.

SPECS: Contains tools for working tactical/law enforcement models of Benelli, Mossberg 500/590/835, and Remington 870/1100/11-87 shotguns. Contents - Magna-Tip screwdriver handle with #210-5 and #270-5 slotted bits, 3⁄16" Philips bit, and Magna-Tip choke tube wrench; 12-gauge shotgun forend wrench; magazine tube/cap pliers; 3⁄8" socket drive, T-handle, and extension with ½” socket, drag link, Rem 870 buttstock bolt socket, and 11⁄16" socket for current-production Rem 1100/11-87 action spring tube nut; nylon/brass hammer; nylon bench block; 6” chain nose pliers; 1⁄16" and 3⁄32" starter punches and pin punches; packing hook; 12-gauge shotgun BoreSnake; ¼ oz. (7.4ml) and double-ended parts cleaning brush. Case - 1000 denier Cordura nylon, O.D. green. 11½” (29.2cm) long, 8½” (21.6cm) high, 3” (7.6cm) thick.

Uutiskirje