Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

Tarvitsetko_apua_iso

MGM TARGETS SWITCHVIEW MODEL #1819SV2


Switchview Model #1819SV2

Switchview Model 1819SV2 fits Bushnell HDMR 3.5-21, Burris M-Tac 1-6. Aluminum lever clamps around your scope’s magnification adjustment ring and provides the extra leverage needed to quickly change magnification settings. Easy to operate on the run and perfect for three-gun competition—use scope at low setting for close targets and crank quickly to higher magnification for distant targets. Lisää...

Tuotenro: 100053505 100053505
Switchview Model 1819SV2 fits Bushnell HDMR 3.5-21, Burris M-Tac 1-6. Aluminum lever clamps around your scope’s magnification adjustment ring and provides the extra leverage needed to quickly change magnification settings. Easy to operate on the run and perfect for three-gun competition—use scope at low setting for close targets and crank quickly to higher magnification for distant targets. Lever requires clearance between the scope body and base or receiver rail for proper operation.

SPECS: Lever length: .880”. Ring diameter 1.819" not including dimensions for the scope's index nub if present. The lever needs .125" of clearance between the scope body and the nearest object for proper operation. Color: Anodized Flat Black.

MGM TARGETS
113 113 1 EUR
100053505
Switchview Model #1819SV2
Valmistajan tuotenumero: 1819SV2 SwitchView mallin 1819SV2 sopii Bushnell HDMR 3,5-21, Burris M-Tac 1-6. Alumiini vipu pihdit teidän soveltamisala suurennuksen säätö renkaaseen ja tarjoaa ylimääräistä vipuvaikutus piti muuttaa nopeasti suurennoksella asetukset. Helppo käyttää ajaa ja täydellinen 3-gun kilpailun — käyttää soveltamisala alimmalle lähellä tavoitteita ja kampi nopeasti suurempi suurennus kaukaisia \u200b\u200btavoitteita. Vipu edellyttää väli soveltamisala laitos ja base tai vastaanottimen rautatie toimivuuteen.
113 EUR 0 113,00 € *
Voi laittaa jälkitilaukseen.
Ominaisuudet: Fits / Used For: Burris M-TAC, Bushnell HDMR Viimeistely: Matte Black

Ominaisuudet

Fits / Used For: Burris M-TAC,Bushnell HDMR Viimeistely: Matte Black

Tuotekuvaus

Made in USA



Switchview Model 1819SV2 fits Bushnell HDMR 3.5-21, Burris M-Tac 1-6. Aluminum lever clamps around your scope’s magnification adjustment ring and provides the extra leverage needed to quickly change magnification settings. Easy to operate on the run and perfect for three-gun competition—use scope at low setting for close targets and crank quickly to higher magnification for distant targets. Lever requires clearance between the scope body and base or receiver rail for proper operation.

SPECS: Lever length: .880”. Ring diameter 1.819" not including dimensions for the scope's index nub if present. The lever needs .125" of clearance between the scope body and the nearest object for proper operation. Color: Anodized Flat Black.