Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

EGW
RUGER PC CARBINE VORTEX RAZOR SIGHT MOUNT

841370116683 296000551
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.831" Overall Width: 1.062" Mounting Hardware: (2) 8-32 Button Head Screws, (1) 8-32 Set Screw) Red Dot Fitment: Vortex Razor, C-More RTS & STS Simply remove the rear sight on your gun and replace it with our mount in order to mount your Vortex Razor, C-More RTS or STS red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs
84.9 84.9 1 EUR
Tuotenro: 296000551
EGW RUGER PC CARBINE VORTEX RAZOR SIGHT MOUNT
Valmistajan tuotenumero: 49456 841370116683 Materiaali: 7075 Alumiini Päällyste: Mattamusta Hardcoat Kokonaispituus: 1.831" Kokonaisleveys: 1.062" Kiinnitystarvikkeet: (2) 8-32 Button Head -ruuvit, (1) 8-32 Set Screw) Punapistetähtäimen sopivuus: Vortex Razor, C-More RTS & STS Poista vain aseen takatähtäin ja korvaa se meidän telineellämme, jotta voit kiinnittää Vortex Razor, C-More RTS tai STS punapistetähtäimen. Aseen muutoksia ei tarvita. Voit milloin tahansa ottaa telineemme pois ja vaihtaa takatähtäimen takaisin. Kiinnitystarvikkeet sisältyvät. Asennusohjeet Poista takatähtäin* Asenna EGW:n tähtäinteline jousiuran paikalle Kiristä set screw -ruuvi (jos sovellettavissa) Aseta punapistetähtäin EGW:n tähtäintelineelle (punapistetähtäimen ja tähtäintelineen väliin asetettu pieni paperinpala helpottaa irrotusta ja pitää Loctiten poissa punapistetähtäimestä.) Levitä sinistä Loctitea mukana tulleisiin kiinnitysruuveihin Kiristä kiinnitysruuvit 15in/lbs momenttiin
84.9 EUR 0 84,90 € *
Jälkitilaus, toimitusaika n. 4-12 viikkoa USA:n varastosta.
Ominaisuudet: Jalustojen lukumäärä: 1-Piece Malli: PC Carbine Materiaali: Aluminum Merkki: Ruger Tyyppi: Tactical Väri: Black

Ominaisuudet

Jalustojen lukumäärä: 1-Piece Malli: PC Carbine Materiaali: Aluminum Tyyli: Tactical Valmistaja: Ruger Väri: Black Toimituksen paino: 0,034kg Toimituksen korkeus: 25mm Toimituksen leveys: 89mm Toimituksen pituus: 140mm

Tuotekuvaus

Made in USA



Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.831" Overall Width: 1.062" Mounting Hardware: (2) 8-32 Button Head Screws, (1) 8-32 Set Screw) Red Dot Fitment: Vortex Razor, C-More RTS & STS Simply remove the rear sight on your gun and replace it with our mount in order to mount your Vortex Razor, C-More RTS or STS red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs
Uutiskirje