Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

MANSON PRECISION
REM CHOKE-STYLE TOOLING

513046012
Fast, Accurate Choke Tube Installations Using Reamers From Dave Manson
A quick and easy method to install choke tubes using a lathe (can be done by hand, however, a lathe gives superior results). Tap and reamer are precision ground from high speed steel and use the same interchangeable pilot bushings. Reamer has an enhanced end relief that provides a faster cut. Pilot bushings are available in diameter increments of .001", and are 2" long for accurate bore alignment. Factory instructions are included. Note: Read and understand the installation requirements on page 62 before proceeding. For best results, remove any existing choke with the Angle Blade Expanding Choke Reamer prior to using the Loon Lake Choke reamer. Click here for proper installation requirements.Uses the same tap and bushings as Win-Choke, requires a different reamer to position threads in a different location. Barrels threaded to this system accept Rem-Choke-style and Remington factory tubes.
SPECS: 12 gauge only. .814"-32 tpi.
364.9 364.9 1 EUR
Tuotenro: 513046012
MANSON PRECISION 12 GAUGE REM-CHOKE REAMER
Valmistajan tuotenumero: RC12GAR Nopea ja helppo tapa asentaa supistajat käyttäen sorvia (voidaan tehdä myös käsin, mutta sorvi antaa parempia tuloksia). Kierretappi ja avartaja on tarkkuushiotut nopeasta teräksestä ja ne käyttävät samoja vaihdettavia ohjainholkkeja. Avartajassa on parannettu loppureliefi, joka mahdollistaa nopeamman leikkuun. Ohjainholkit ovat saatavilla .001" välein ja ovat 2" pituisia tarkkaa kaliiperin linjausta varten. Tehtaan ohjeet sisältyvät. Huomio: Lue ja ymmärrä asennusvaatimukset sivulla 62 ennen jatkamista. Parhaan tuloksen saavuttamiseksi poista olemassa oleva supistaja käyttäen Angle Blade Expanding Choke Reamer -avartajaa ennen Loon Lake Choke -avartajan käyttöä. Klikkaa tästä oikean asennuksen vaatimuksiin. Käyttää samaa kierretappia ja holkkeja kuin Win-Choke, vaatii eri avartajan sijoittaakseen kierteet eri kohtaan. Tähän järjestelmään kierretyt piiput hyväksyvät Rem-Choke-tyyliset ja Remingtonin tehtaan supistajat.
364.9 EUR 0 364,90 € *
Jälkitilaus, toimitusaika n. 4-12 viikkoa USA:n varastosta.
Ominaisuudet: Malli: Universal Shotguns Merkki: Remington Väljyys: 12 Gauge

Ominaisuudet

Halkaisija: 12 Gauge Malli: Universal Shotguns Valmistaja: Remington Toimituksen paino: 0,318kg Toimituksen korkeus: 28mm Toimituksen leveys: 36mm Toimituksen pituus: 229mm

Tuotekuvaus

Made in USA




Fast, Accurate Choke Tube Installations Using Reamers From Dave Manson
A quick and easy method to install choke tubes using a lathe (can be done by hand, however, a lathe gives superior results). Tap and reamer are precision ground from high speed steel and use the same interchangeable pilot bushings. Reamer has an enhanced end relief that provides a faster cut. Pilot bushings are available in diameter increments of .001", and are 2" long for accurate bore alignment. Factory instructions are included. Note: Read and understand the installation requirements on page 62 before proceeding. For best results, remove any existing choke with the Angle Blade Expanding Choke Reamer prior to using the Loon Lake Choke reamer. Click here for proper installation requirements.Uses the same tap and bushings as Win-Choke, requires a different reamer to position threads in a different location. Barrels threaded to this system accept Rem-Choke-style and Remington factory tubes.
SPECS: 12 gauge only. .814"-32 tpi.
Uutiskirje