Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

EGW
LPA-LOW LEUPOLD DELTAPONT PRO SIGHT MOUNT

841370115662 296000678
EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mountwill make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount does not fit: Rock Island 1911s EAA / Tanfoglio Witness' with LPA/Bomar style rear sights (EAA Super Sight)
84.9 84.9 1 EUR
Tuotenro: 296000678
EGW LPA-LOW LEUPOLD DELTAPOINT PRO SIGHT MOUNT
Valmistajan tuotenumero: 49403 841370115662 EGW:n punapistetähtäimet on tarkoitettu asennettavaksi vasemmalta oikealle (piipun ollessa suunnattuna eteenpäin). Urassa on progressiivinen kartiointi, joka helpottaa asennusta. Poista aseen taka-äimäin ja korvaa se EGW:n kiinnikkeellä, jotta voit asentaa Leupold DeltaPoint Pro, JPoint, Redfield Accelerator tai Optima -punapistetähtäimen. Voit milloin tahansa ottaa kiinnikkeen pois ja palauttaa taka-äimäimen. Asennustarvikkeet sisältyvät pakkaukseen. Asennusohjeet: Poista taka-äimäin* Asenna EGW:n tähtäinkiinnike uraan Kiristä asetuspultti (jos sovellettavissa) Aseta punapistetähtäin EGW:n tähtäinkiinnikkeelle (punapistetähtäimen ja kiinnikkeen väliin asetettu pieni paperinpala helpottaa irrottamista ja pitää Loctiten poissa punapistetähtäimestä) Levitä sinistä Loctitea mukana tulleisiin asennuspultteihin Kiristä asennuspultit 15 tuumapoundin momenttiin Aseen muokkaus voi mitätöidä valmistajan takuun. Tämän tuotteen tulisi asentaa ja tarkistaa pätevä aseaseppä. Tuotteelle ei anneta mitään takuuta vahingoista tai vammoista, jotka voivat aiheutua tuotteen virheellisestä asennuksesta tai käytöstä. Tämä kiinnike ei sovi: Rock Island 1911 -aseisiin EAA / Tanfoglio Witness -aseisiin, joissa on LPA/Bomar-tyyliset taka-äimäimet (EAA Super Sight)
84.9 EUR 0 84,90 € *
Ilmoita saatavuudesta
Ei saatavilla.
Ominaisuudet: Jalustojen lukumäärä: 1-Piece Malli: SAR K2P, Baby Desert Eagle, Witness Elite Match, Jericho 941 Materiaali: Aluminum Merkki: Magnum Research, IWI, EAA Tyyppi: Tactical Väri: Black

Ominaisuudet

Jalustojen lukumäärä: 1-Piece Malli: Witness Elite Match,Baby Desert Eagle,SAR K2P,Jericho 941 Materiaali: Aluminum Tyyli: Tactical Valmistaja: EAA,IWI,Magnum Research Väri: Black Toimituksen paino: 0,045kg Toimituksen korkeus: 25mm Toimituksen leveys: 76mm Toimituksen pituus: 140mm

Tuotekuvaus

Made in USA



EGW red dot sights are meant to be installed from the left to the right (with the muzzle facing forward). The dovetail has a progressive taper to allow for easier install. Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Leupold DeltaPoint Pro, JPoint, Redfield Accelerator, or Optima red-dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mountwill make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs Modification of your firearm may nullify the manufacturer's warranty. This product should be installed and checked by a qualified gunsmith. No liability is expressed or implied for damage or injury which may result from improper installation or use of this product. This mount does not fit: Rock Island 1911s EAA / Tanfoglio Witness' with LPA/Bomar style rear sights (EAA Super Sight)
Uutiskirje