Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

SB TACTICAL
LOCKING BUFFER TUBE FOLDING ADAPTER

699618782806 100032046
Lets You Install a Folding Stock On Your Chassis-System Bolt Rifle
The BTFA Buffer Tube Folding Adapter from SB Tactical provides a simple upgrade to improve the portability of your bolt action chassis-system rifle by giving it a folding buttstock. The BTFA lets you put a folding stock on any rifle that uses a standard AR-15 buffer tube as the attachment point for mounting its buttstock. The adapter simply screws into the rear of the chassis - where the AR-15 buffer tube would normally go - and then the buffer tube is screwed into the BTFA. The BTFA adds only 1.1" to your rifle's length-of-pull when installed. You can either compensate for that by extending the buttstock a little less, if it's an adjustable M4 carbine type stock. And many shooters with longer arms will welcome the additional LOP. Reversible for right- or left side-folding - whatever works best for you Securely locks in the open AND closed positions Accepts are AR-15 buffer tube, A2 rifle or M4 carbine type Minimal weight (only 3.4 oz.) & bulk (1.1" added to LOP) Caution: Fits chassis system rifles only, NOT standard AR-15 platform (see Gun Tech Note below) SB Tactical's BTFA Buffer Tube Folding Adapter is constructed of strong yet lightweight 6061 T6 aluminum with a tough military Type III hardcoat anodized finish to resist surface wear and corrosion. Brownells Gun Tech™ Note: You're probably thinking, "So why can't I use the BTFA to put a folding stock on my standard-configuration AR-15? To ensure maximum strength, the BTFA has solid bulkheads that prevent the passage of a recoil buffer, so it will NOT work with the standard AR-15 operating system. For the AR-15, we offer the Law Tactical Gen3-M folding stock adapter (#100-015-850).
0 0 1 EUR
Tuotenro: 100032046
SB TACTICAL LOCKING BUFFER TUBE FOLDING ADAPTER
Valmistajan tuotenumero: BTFA 699618782806 SB Tacticalin BTFA Buffer Tube Folding Adapter tarjoaa yksinkertaisen päivityksen parantaakseen pulttilukkoisen runkojärjestelmäkiväärin kannettavuutta antamalla sille taittuvan perän. BTFA mahdollistaa taittuvan tukin asentamisen mihin tahansa kivääriin, joka käyttää vakio AR-15 buffer putkea perän kiinnityspisteenä. Adapteri ruuvataan suoraan rungon takaosaan - missä AR-15 buffer putki normaalisti menisi - ja sen jälkeen buffer putki ruuvataan BTFA:han. BTFA lisää vain 1,1 tuumaa kiväärin vetopituuteen asennettuna. Voit kompensoida tätä jättämällä säädettävän M4 karbiinityyppisen perän hieman vähemmän ulosvedetyksi, jos se on säädettävä. Monet pidempikätiset ampujat toivottavat lisävetopituuden tervetulleeksi. Käännettävissä oikealle tai vasemmalle taittuvaksi - mikä toimii sinulle parhaiten Turvallisesti lukittuu sekä avoimeen että suljettuun asentoon Sopii kaikkiin AR-15 buffer putkiin, A2-kiväärin tai M4-karbiinityyppisiin Minimaalinen paino (vain 3,4 unssia) & koko (1,1 tuumaa lisättyä vetopituutta) Varoitus: Sopii vain runkojärjestelmäkivääreihin, EI vakio AR-15 alustaan (katso Gun Tech Huomautus alla) SB Tacticalin BTFA Buffer Tube Folding Adapter on valmistettu vahvasta mutta kevyestä 6061 T6 alumiinista, jossa on kestävä sotilastason III kova-anodisoitu viimeistely, joka vastustaa pintakulumista ja korroosiota. Brownells Gun Tech™ Huomautus: Saatat ajatella, 'Miksi en voi käyttää BTFA:ta asentaakseni taittuvan tukin tavalliseen AR-15 konfiguraatiooni?' Maksimaalisen lujuuden takaamiseksi BTFA:ssa on kiinteät väliseinät, jotka estävät iskunvaimentimen läpikulun, joten se EI toimi vakio AR-15 toimintajärjestelmän kanssa. AR-15:lle tarjoamme Law Tactical Gen3-M taittuvan tukin adapterin (#100-015-850).
Ilmoita saatavuudesta
Ei saatavilla.

Ominaisuudet

Toimituksen paino: 0,141kg Toimituksen korkeus: 89mm Toimituksen leveys: 89mm Toimituksen pituus: 70mm

Tuotekuvaus

Made in USA
USA:n vientiluvan tyyppi: 0A501.x



Lets You Install a Folding Stock On Your Chassis-System Bolt Rifle
The BTFA Buffer Tube Folding Adapter from SB Tactical provides a simple upgrade to improve the portability of your bolt action chassis-system rifle by giving it a folding buttstock. The BTFA lets you put a folding stock on any rifle that uses a standard AR-15 buffer tube as the attachment point for mounting its buttstock. The adapter simply screws into the rear of the chassis - where the AR-15 buffer tube would normally go - and then the buffer tube is screwed into the BTFA. The BTFA adds only 1.1" to your rifle's length-of-pull when installed. You can either compensate for that by extending the buttstock a little less, if it's an adjustable M4 carbine type stock. And many shooters with longer arms will welcome the additional LOP. Reversible for right- or left side-folding - whatever works best for you Securely locks in the open AND closed positions Accepts are AR-15 buffer tube, A2 rifle or M4 carbine type Minimal weight (only 3.4 oz.) & bulk (1.1" added to LOP) Caution: Fits chassis system rifles only, NOT standard AR-15 platform (see Gun Tech Note below) SB Tactical's BTFA Buffer Tube Folding Adapter is constructed of strong yet lightweight 6061 T6 aluminum with a tough military Type III hardcoat anodized finish to resist surface wear and corrosion. Brownells Gun Tech™ Note: You're probably thinking, "So why can't I use the BTFA to put a folding stock on my standard-configuration AR-15? To ensure maximum strength, the BTFA has solid bulkheads that prevent the passage of a recoil buffer, so it will NOT work with the standard AR-15 operating system. For the AR-15, we offer the Law Tactical Gen3-M folding stock adapter (#100-015-850).
Uutiskirje