28,000 PSI-Flows At 475\ F. The Best All-Round Solder For Gunsmithing
Brownells Hi-Force 44 Solder is an alloy solder containing 4% silver and 96% tin. Excellent for steel, stainless steel, nickel, brass and copper. Completely non-toxic. Flows free and smooth at about 475° F., greatly reducing heating time. No need for cumbersome oxyacetylene setups. Prevents black oxide formation to reduce cleanup time. Provides 14,000 to 28,000 PSI tensile strength. Will not crack under stress as do other low temperature soldering materials. And, a big plus . . . customers report that parts joined with Hi-Force 44 Solder showed no effects when immersed in hot bluing tanks! Use #4 Comet Flux.
Arvioiden lukumäärä: 1
Arvostelut brownells.com sivustolla: 1
Arvioiden keskiarvo: 4
reattaching ribs(24.5.2012)
The only thing that could improve this is offering it slightly wider. I run it through the rolling mill about 1/2 the time to get it a little wider. This and the Comet flux has made this job far easier than I thought possible - sort of no sweat sweating. Be ready to snug up the jig as it flows and give the part plenty of time too cool before loosening.
Tuotenro: 080649100 BROWNELLS HI-FORCE 44™ SOLDER 1LB WIRE Brownells Hi-Force 44 juote on seos juote sisältää 4 % hopea ja 96 % tinaa. Erinomainen teräs, ruostumaton teräs, nikkeli, messinki ja kupari. Täysin myrkytön. Virtaa vapaan ja sujuva noin 475 ° F., mikä vähentää lämmitysaika. Ei tarvetta raskas Happiasetyleenileikkaus asetelmia. Estää mustasta oksidi muodostumista vähentää aivan aika. Tarjoaa 14000 28000 PSI vetolujuus. Eikä halki stressiä kuin muut alhainen lämpötila juotos materiaaleja. Ja iso plus... Asiakkaat kertomus osat yhdistettiin Hi-Force 44 juottaa osoitti ei vaikutuksia, kun upotetaan kuuma bluing säiliöt! Käytä #4 komeetta Flux.
144.9EUR0144,90 €
*
Jälkitilaus, toimitusaika n. 4-12 viikkoa USA:n varastosta.
Tuotenro: 080649390 BROWNELLS HI-FORCE 44™ SOLDER 1LB RIBBON Valmistajan tuotenumero: NONE Brownells Hi-Force 44 juote on seos juote sisältää 4 % hopea ja 96 % tinaa. Erinomainen teräs, ruostumaton teräs, nikkeli, messinki ja kupari. Täysin myrkytön. Virtaa vapaan ja sujuva noin 475 ° F., mikä vähentää lämmitysaika. Ei tarvetta raskas Happiasetyleenileikkaus asetelmia. Estää mustasta oksidi muodostumista vähentää aivan aika. Tarjoaa 14000 28000 PSI vetolujuus. Eikä halki stressiä kuin muut alhainen lämpötila juotos materiaaleja. Ja iso plus... Asiakkaat kertomus osat yhdistettiin Hi-Force 44 juottaa osoitti ei vaikutuksia, kun upotetaan kuuma bluing säiliöt! Käytä #4 komeetta Flux.
139.9EUR3139,90 €
*
Toimitusaika noin 2-4 viikkoa. 3 kpl. USA:n varastossa
28,000 PSI-Flows At 475\ F. The Best All-Round Solder For Gunsmithing
Brownells Hi-Force 44 Solder is an alloy solder containing 4% silver and 96% tin. Excellent for steel, stainless steel, nickel, brass and copper. Completely non-toxic. Flows free and smooth at about 475° F., greatly reducing heating time. No need for cumbersome oxyacetylene setups. Prevents black oxide formation to reduce cleanup time. Provides 14,000 to 28,000 PSI tensile strength. Will not crack under stress as do other low temperature soldering materials. And, a big plus . . . customers report that parts joined with Hi-Force 44 Solder showed no effects when immersed in hot bluing tanks! Use #4 Comet Flux.
Arvioiden lukumäärä: 1
Arvostelut brownells.com sivustolla: 1
Arvioiden keskiarvo: 4
reattaching ribs(24.5.2012)
The only thing that could improve this is offering it slightly wider. I run it through the rolling mill about 1/2 the time to get it a little wider. This and the Comet flux has made this job far easier than I thought possible - sort of no sweat sweating. Be ready to snug up the jig as it flows and give the part plenty of time too cool before loosening.