Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

EGW
IGNITION KIT WITH STAINLESS STEEL LIGHTENED HAMMER

841370117987 296000783
This kit is not 100% drop-in and should be installed or checked over by a competent gunsmith prior to shooting. Kit includes: EGW HD Hard Sear EGW HD Stainless Steel Lightened Hammer EGW Ball Head Disconnector EGW Evolved Sear Spring 19# ISMI Main Spring This kit is not 100% drop-in and should be installed or checked over by a competent gunsmith prior to shooting. Please note: EGW hammers should not be coated by applications that require the product to be heated. These coatings heat the hammer and can cause the hammer to become brittle. Some coatings such as Robar's NP3 will work fine, but please consult the coater before to make sure the process is safe for heat treated components. Coating The Hammer can Lead To Fractures And Will Void The Warranty.
229.9 229.9 1 EUR
Tuotenro: 296000783
EGW IGNITION KIT WITH STAINLESS STEEL LIGHTENED HAMMER
Valmistajan tuotenumero: 10211SS 841370117987 Tämä sarja ei ole 100% asennusvalmis ja se tulisi asentaa tai tarkastaa pätevän aseasepän toimesta ennen ampumista. Sarja sisältää: EGW HD Hard Sear EGW HD Ruostumattomasta teräksestä valmistettu kevennetty vasara EGW Ball Head Disconnector EGW Evolved Sear Spring 19# ISMI Pääjousi Tämä sarja ei ole 100% asennusvalmis ja se tulisi asentaa tai tarkastaa pätevän aseasepän toimesta ennen ampumista. Huomioithan: EGW:n vasaroita ei tulisi pinnoittaa menetelmillä, jotka vaativat tuotteen lämmittämistä. Nämä pinnoitteet lämmittävät vasaran ja voivat aiheuttaa sen haurastumisen. Jotkut pinnoitteet, kuten Robar's NP3, toimivat hyvin, mutta ole hyvä ja konsultoi pinnoittajaa varmistaaksesi, että prosessi on turvallinen lämpökäsitellyille komponenteille. Vasaran pinnoittaminen voi johtaa murtumiin ja mitätöi takuun.
229.9 EUR 0 229,90 € *
Jälkitilaus, toimitusaika n. 4-12 viikkoa USA:n varastosta.
Ominaisuudet: Viimeistely: Stainless Steel

Ominaisuudet

Viimeistely: Stainless Steel Toimituksen paino: 0,045kg Toimituksen korkeus: 25mm Toimituksen leveys: 114mm Toimituksen pituus: 140mm

Tuotekuvaus

Made in USA
USA:n vientiluvan tyyppi: 0A501.c



This kit is not 100% drop-in and should be installed or checked over by a competent gunsmith prior to shooting. Kit includes: EGW HD Hard Sear EGW HD Stainless Steel Lightened Hammer EGW Ball Head Disconnector EGW Evolved Sear Spring 19# ISMI Main Spring This kit is not 100% drop-in and should be installed or checked over by a competent gunsmith prior to shooting. Please note: EGW hammers should not be coated by applications that require the product to be heated. These coatings heat the hammer and can cause the hammer to become brittle. Some coatings such as Robar's NP3 will work fine, but please consult the coater before to make sure the process is safe for heat treated components. Coating The Hammer can Lead To Fractures And Will Void The Warranty.
Uutiskirje