Enhances Shoulder Purchase For Comfort & Better Weapon Control
Replacement recoil pads give you enhanced shoulder purchase and recoil control with your Magpul CTR™, MOE™, UBR™, or ACS™ stock. Non-slip rubber surface holds firmly to your clothing when it counts in tactical operations or competition for improved target acquisition and reduced felt recoil. Extended is the original factory pad for Commercial CTR and MOE stocks. May also be mounted on ACS, UBR, and Mil-Spec CTR/MOE stocks to increase length of pull by ¼". Enhanced model's thicker, vented, shock-absorbing construction helps reduce felt recoil for better weapon control and faster follow-up shots. Fits ACS, UBR, and Mil-Spec CTR/MOE. Will also fit CTR/MOE stocks mounted on commercial buffer tubes shorter than 7¼".
SPECS: Rubber exterior over hard molded polymer core, black.Extended – .55" thick (14mm); Enhanced – .70" (17mm) thick.
Lisää...
Parantaa olkapää osto Comfort & parempi ase valvonta
Taktinen rekyyliperälevy vähentää rekyyliä eikä luista olkapäällä ja se sopii Magpulin CTR, MOE, UBR ja ACS periin.
Tiedot: kumi ulkoa yli kova valettu polymeeri core musta. Laajennettu-. 55" paksu (14mm); Parannettu –. 70"(17 mm) paksu.
Lisää...
Asiakasarviot: Paranneltu rekyyliperälevy, paksuus 17 mm
Arvioiden lukumäärä: 5
Arvostelut brownells.com sivustolla: 5
Arvioiden keskiarvo: 5
Great Product(26.2.2010)
With a 5.56mm its really not needed but it does cut down felt recoil a decent bit, great for long shooting periods or if you want to extend the length of pull of your stock just a little without having to move to that next notch on the buffer tube.
Pretty and does the job its designed for(26.4.2011)
Magpul products are setting very high standard in the tactical gun market. The MAG317 but pad is no exception. Not only this optional accessory looks good in the gun but it is also user friendly. Once you shoulder the gun, the buttpad's ergonomic contour automatically locks where it should be - allowing the operator faster and more precise aim. The intricate exterior pattern of the pad is superb assuring non slip hold. The unique internal shock absorber vents really works. With a neat price tag to go along, its 5 star all the way.
Enhanced is right.(7.1.2012)
Recoil on an AR15 in 5.56x45mm is negligible. So calling this a recoil pad, as some do, is not really accurate. However, what this pad offers is a LOT of additional shooter comfort.
The angle on the back of the pad is different from the std pad. It allows you to place the pad higher-up on your shoulder without hurting your collar bone or deltoid muscle. Its texture is also grippier than the std pad and it is a little thicker.
Lastly, the "vents" in the back of the pad don't really help reduce any recoil. They do make the recoil stroke feel a little softer in your shoulder, but it's NOT a night and day difference with 5.56. Now, on a 6.8/6.5/7.62x39mm AR15, the difference would be worth the cost of the pad alone. A buddy uses this one on his AK with an AR stock adapter and he really noticed a difference in the character of the recoil stroke due to the bigger cartridge and the AK's sharper recoil impulse.
It's not mandatory, but it's also equally NOT a wasted investment, either.
Great for comfort.(3.6.2012)
As other users have posted, this item is not going to provide any significant difference in the recoil feel, as it purely aesthetic on a 5.56
It does provide comfort when compared to other butt-pads.
Increase the Length of Pull of your CTR(16.11.2013)
I love the CTR stock, it's light and compact but even on the last notch of the stock tube I found the length of pull to be a bit too short.
Tuotenro: 100004168 Paranneltu rekyyliperälevy, paksuus 17 mm Valmistajan tuotenumero: MAG317-BLK873750001593 Taktinen rekyyliperälevy vähentää rekyyliä eikä luista olkapäällä ja se sopii Magpulin CTR, MOE, UBR ja ACS periin.
32.9EUR15532,90 €
*
Toimitusaika noin 2-4 viikkoa. Yli 10 kpl. USA:n varastossa
Ominaisuudet:Materiaali: RubberPaksuus: .70Tyyppi: StandardVäri: Black
Materiaali:
Rubber
Paksuus:
.70
Tyyli:
Standard
Väri:
Black
Toimituksen paino: 0,077kgToimituksen korkeus: 32mmToimituksen leveys: 102mmToimituksen pituus: 241mm
Tuotekuvaus
Made in USA
Tuotenro: 100004167 MAGPUL EXTENDED RECOIL PAD Valmistajan tuotenumero: MAG316-BLK873750001999 Taktinen rekyyliperälevy vähentää rekyyliä eikä luista olkapäällä ja se sopii Magpulin CTR, MOE, UBR ja ACS periin.
32.9EUR2432,90 €
*
Toimitusaika noin 2-4 viikkoa. Yli 10 kpl. USA:n varastossa
Ominaisuudet:Materiaali: RubberPaksuus: .55Tyyppi: StandardVäri: Black
Enhances Shoulder Purchase For Comfort & Better Weapon Control
Replacement recoil pads give you enhanced shoulder purchase and recoil control with your Magpul CTR™, MOE™, UBR™, or ACS™ stock. Non-slip rubber surface holds firmly to your clothing when it counts in tactical operations or competition for improved target acquisition and reduced felt recoil. Extended is the original factory pad for Commercial CTR and MOE stocks. May also be mounted on ACS, UBR, and Mil-Spec CTR/MOE stocks to increase length of pull by ¼". Enhanced model's thicker, vented, shock-absorbing construction helps reduce felt recoil for better weapon control and faster follow-up shots. Fits ACS, UBR, and Mil-Spec CTR/MOE. Will also fit CTR/MOE stocks mounted on commercial buffer tubes shorter than 7¼".
SPECS: Rubber exterior over hard molded polymer core, black.Extended – .55" thick (14mm); Enhanced – .70" (17mm) thick.
Lisää...
Parantaa olkapää osto Comfort & parempi ase valvonta
Taktinen rekyyliperälevy vähentää rekyyliä eikä luista olkapäällä ja se sopii Magpulin CTR, MOE, UBR ja ACS periin.
Tiedot: kumi ulkoa yli kova valettu polymeeri core musta. Laajennettu-. 55" paksu (14mm); Parannettu –. 70"(17 mm) paksu.
Lisää...
Asiakasarviot: Paranneltu rekyyliperälevy, paksuus 17 mm
Arvioiden lukumäärä: 5
Arvostelut brownells.com sivustolla: 5
Arvioiden keskiarvo: 5
Great Product(26.2.2010)
With a 5.56mm its really not needed but it does cut down felt recoil a decent bit, great for long shooting periods or if you want to extend the length of pull of your stock just a little without having to move to that next notch on the buffer tube.
Pretty and does the job its designed for(26.4.2011)
Magpul products are setting very high standard in the tactical gun market. The MAG317 but pad is no exception. Not only this optional accessory looks good in the gun but it is also user friendly. Once you shoulder the gun, the buttpad's ergonomic contour automatically locks where it should be - allowing the operator faster and more precise aim. The intricate exterior pattern of the pad is superb assuring non slip hold. The unique internal shock absorber vents really works. With a neat price tag to go along, its 5 star all the way.
Enhanced is right.(7.1.2012)
Recoil on an AR15 in 5.56x45mm is negligible. So calling this a recoil pad, as some do, is not really accurate. However, what this pad offers is a LOT of additional shooter comfort.
The angle on the back of the pad is different from the std pad. It allows you to place the pad higher-up on your shoulder without hurting your collar bone or deltoid muscle. Its texture is also grippier than the std pad and it is a little thicker.
Lastly, the "vents" in the back of the pad don't really help reduce any recoil. They do make the recoil stroke feel a little softer in your shoulder, but it's NOT a night and day difference with 5.56. Now, on a 6.8/6.5/7.62x39mm AR15, the difference would be worth the cost of the pad alone. A buddy uses this one on his AK with an AR stock adapter and he really noticed a difference in the character of the recoil stroke due to the bigger cartridge and the AK's sharper recoil impulse.
It's not mandatory, but it's also equally NOT a wasted investment, either.
Great for comfort.(3.6.2012)
As other users have posted, this item is not going to provide any significant difference in the recoil feel, as it purely aesthetic on a 5.56
It does provide comfort when compared to other butt-pads.
Increase the Length of Pull of your CTR(16.11.2013)
I love the CTR stock, it's light and compact but even on the last notch of the stock tube I found the length of pull to be a bit too short.