Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

ULTRADYNE USA
AR .308 APOLLO S COMPENSATOR 7.62MM

851019008668 100061519
The Perfect Balance of Compensator Performance
The Ultradyne 7.62 Apollo S Compensator 5/8”x24 was made for the shooter who wants recoil reduction, while still getting less perceived blast with a slightly less aggressive venting of gas. This is the Goldilocks compensator. Not too much, but more than enough in all three key areas, muzzle rise, recoil abatement, and blast reduction. The Ultradyne 7.62 Apollo S Compensator 5/8”x24 is a snap to install, as the included timing nut ensure proper installation. 5/8”x24 threads 416 stainless steel Rated for standard cartridges in following calibers - .308 Win, 7.62x51 NATO, .300 AAC Black Out, .300 Savage, .303 Savage, .30/30 Win The Ultradyne 7.62 Apollo S Compensator 5/8”x24 uses a 5-port design to modulate the recoil, and make the shot as smooth as possible.
229.9 229.9 1 EUR
Tuotenro: 100061519
ULTRADYNE USA 7.62 APOLLO S COMPENSATOR 5/8X24
Valmistajan tuotenumero: UD10270 851019008668 Ultradyne 7.62 Apollo S -kompensoija, jonka kierre on 5/8”x24, on suunniteltu ampujalle, joka haluaa vähentää rekyyliä samalla kun kokee vähemmän räjähdyksen tunnetta hieman vähemmän aggressiivisen kaasun poistumisen ansiosta. Tämä on juuri sopiva kompensoija. Ei liikaa, mutta enemmän kuin tarpeeksi kaikilla kolmella keskeisellä alueella: piipun nousun vähentäminen, rekyylin lievitys ja räjähdyksen tunteen vähentäminen. Ultradyne 7.62 Apollo S -kompensoija 5/8”x24 on helppo asentaa, sillä mukana tuleva ajoitusprikka varmistaa oikean asennuksen. 5/8”x24 -kierteet 416 ruostumaton teräs Soveltuu standardiluoteihin seuraavissa kaliipereissa - .308 Win, 7.62x51 NATO, .300 AAC Black Out, .300 Savage, .303 Savage, .30/30 Win Ultradyne 7.62 Apollo S -kompensoija 5/8”x24 käyttää 5-porttista suunnittelua rekyylin hallintaan ja tekee laukauksesta mahdollisimman sulavan.
229.9 EUR 6 229,90 € *
Toimitusaika noin 2-4 viikkoa.
6 kpl. USA:n varastossa

Ominaisuudet

Toimituksen paino: 0,181kg Toimituksen korkeus: 51mm Toimituksen leveys: 51mm Toimituksen pituus: 108mm

Tuotekuvaus

Made in USA



The Perfect Balance of Compensator Performance
The Ultradyne 7.62 Apollo S Compensator 5/8”x24 was made for the shooter who wants recoil reduction, while still getting less perceived blast with a slightly less aggressive venting of gas. This is the Goldilocks compensator. Not too much, but more than enough in all three key areas, muzzle rise, recoil abatement, and blast reduction. The Ultradyne 7.62 Apollo S Compensator 5/8”x24 is a snap to install, as the included timing nut ensure proper installation. 5/8”x24 threads 416 stainless steel Rated for standard cartridges in following calibers - .308 Win, 7.62x51 NATO, .300 AAC Black Out, .300 Savage, .303 Savage, .30/30 Win The Ultradyne 7.62 Apollo S Compensator 5/8”x24 uses a 5-port design to modulate the recoil, and make the shot as smooth as possible.
Uutiskirje