Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

SINCLAIR INTERNATIONAL
AR-15/M16 SINGLE SHOT MAGAZINE FOLLOWER

749002692
If you are using the longer, heavier bullets in your AR-15, then you need a Sinclair AR-15 Single Shot Follower. The longer, heavier bullets are normally loaded longer than magazine length. The Sinclair AR-15 Single Shot Follower positions the 223 Remington cartridge loaded with longer bullets correctly for smooth feeding into the chamber. Once a round is fired, the bolt retracts and locks behind the follower in the empty/loading position. No need to take your magazine apart! It takes only a few seconds to install the Sinclair Follower on top of the existing follower. It can be removed just as quickly. This follower addresses many of the problems with existing single shot followers on the market. The satin finished anodized aluminum wears better than the plastic followers and is easily noticeable in the magazine. Works perfectly in GI metal magazines and Brownell magazines. Will not work in any of the inexpensive, plastic magazines we tested. Will work with 450 SOCOM and 450 Bushmaster.
26.9 26.9 1 EUR
Tuotenro: 749002692
SINCLAIR INTERNATIONAL AR-15 ALUMINUM SINGLE SHOT FOLLOWER
Valmistajan tuotenumero: 141300 Jos käytät pidempiä ja painavampia luoteja AR-15:ssasi, tarvitset Sinclair AR-15 Single Shot -lippaanohjaimen. Nämä pidemmät ja painavammat luodit ladataan yleensä pidemmiksi kuin lippaan pituus sallii. Sinclair AR-15 Single Shot -lippaanohjain asettaa 223 Remington -patruunan oikein pidemmillä luodeilla varustettuna, mikä mahdollistaa sujuvan syötön kammioon. Kun laukaus on ammuttu, lukko vetäytyy taakse ja lukittuu lippaanohjaimen taakse tyhjään/latausasentoon. Sinun ei tarvitse purkaa lippaasi! Sinclair-ohjaimen asentaminen nykyisen ohjaimen päälle vie vain muutaman sekunnin. Se voidaan poistaa yhtä nopeasti. Tämä ohjain ratkaisee monia markkinoilla olevien yksittäislaukausohjainten ongelmista. Satinoitu anodisoitu alumiini kestää paremmin kuin muoviset ohjaimet ja on helposti havaittavissa lippaassa. Toimii moitteettomasti GI-metallilippaissa ja Brownells-lippaissa. Ei toimi testaamissamme edullisissa muovilippaissa. Toimii 450 SOCOM- ja 450 Bushmaster -patruunoilla.
26.9 EUR 3 26,90 € *
Toimitusaika noin 2-4 viikkoa.
3 kpl. USA:n varastossa
Ominaisuudet: Merkki: AR-15 Määrä: 1

Ominaisuudet

Valmistaja: AR-15 Toimituksen paino: 0,023kg Toimituksen korkeus: 5mm Toimituksen leveys: 142mm Toimituksen pituus: 180mm

Tuotekuvaus

Made in USA
USA:n vientiluvan tyyppi: 0A501.x




If you are using the longer, heavier bullets in your AR-15, then you need a Sinclair AR-15 Single Shot Follower. The longer, heavier bullets are normally loaded longer than magazine length. The Sinclair AR-15 Single Shot Follower positions the 223 Remington cartridge loaded with longer bullets correctly for smooth feeding into the chamber. Once a round is fired, the bolt retracts and locks behind the follower in the empty/loading position. No need to take your magazine apart! It takes only a few seconds to install the Sinclair Follower on top of the existing follower. It can be removed just as quickly. This follower addresses many of the problems with existing single shot followers on the market. The satin finished anodized aluminum wears better than the plastic followers and is easily noticeable in the magazine. Works perfectly in GI metal magazines and Brownell magazines. Will not work in any of the inexpensive, plastic magazines we tested. Will work with 450 SOCOM and 450 Bushmaster.
Uutiskirje