Korisi on tyhjä.

Ostoskori

ZRO DELTA
AR-15 LOWER PARTS KIT

100500154

The Enhanced Lower Parts Kit is phosphate coated and includes all the foundational parts for the LPK minus the Trigger Guard, Grip, and Fire Control Assemblies.

Lisää...

Tämä paranneltu Lower Parts Kit on fosfaattipinnoitettu ja sisältää kaikki perustarvikeosat LPK:lle lukuun ottamatta liipaisukaarta, pistoolikahvaa ja tulenjohtokokoonpanoja.

Lisää...

Asiakasarviot: ZRO DELTA AR-15 LOWER PARTS BUILDER KIT

Arvioiden lukumäärä: 10
Arvostelut brownells.com sivustolla: 10
Arvioiden keskiarvo: 2,9

Great quality at a reasonable price! (31.3.2017)

Great finish and fit. Not covered in sloppy grease but lightly coated in preservative. Everything fit great! The front pivot pin fit very snugly and took out all the upper/lower slop in two sets I tried it in. I've spent money on National Match and oversized pins and this one worked just as well. I'll buy again for sure.

I do not recommend. (12.5.2017)

Kit seemed fine looking it over initially. Once installed the safety selector switch does not smoothly rotate from safe to fire. It feels gritty and takes more force than it should. My other issue is the take down pins. Same issue, they do not smoothly push out and take more force than normal. It's like the detent is binding on the surface of the selector and take down pins. The rest of the kit is fine and I'll make do with the take down pins. The safety selector, I will have to replace for something else. It just feels terrible.

Works fine (25.8.2017)

Used in a build for a friend. I didn't notice any problems. It went into an Anderson lower and I did not use the trigger springs.

Will buy another for future builds

Kind of an odd LPK... (2.9.2017)

A few non-standard parts here- for one, the takedown detents are black (not gold) and asymmetrical in shape. The blunt end needs to face the pin, because the pointy end will lock your pin. FCG pins are .155 or greater, and would not pass through a Noveske lower (NBD, I have a pile of standard pins on my bench). Selector detent, also too pointy to interface with the selector (or recess too deep?) maybe they will break in as they grind, but I junked those too. Lastly, the BHO roll pin is a spiral vs. a C (again, no biggie, just strange). I would avoid this product.

Get what you pay for (12.12.2017)

I bought a few of these. They are nothing special and priced accordingly. I had a bad mag dis connector and they quickly sent me a replacement, kit comes with a very plastic dis connect button. A nice cheap way to finish off your project and get it through the paces, then swap out for better parts later if you see need to. They will probably stay in a while and work fine.

Poor quality overall (31.12.2017)

Same issues as the other reviewers - should've known better than to buy this.

The detents for the takedown grab the takedown pins far more than they should. Took a file to them to round them off a bit to alleviate this.

The safety included had a horrible feel to it - very gritty and more resistance than should be present. Swapped it for another safety lever that I had and the problem went away .

Also worth noting, this kit does not include a grip screw. The picture accurately depicts that, I just overlooked it and could see others overlooking the same. Luckily I had a few extra on hand.

For the money...this kit can't be beat! (19.1.2018)

I have purchased and used these kits in the past and recently purchased two more. After reading the reviews, I thought I would give my findings. Maybe because I am a gunsmith and an experienced builder, I have not had a single problem! I will be purchasing more.

Waste of Money (6.2.2018)

Would not recommend to anyone. Parts were chiseled to dimensions. Poor quality.

Terrible... (8.8.2018)

Good cheap kit, finish is awful, obvious porosity in casting surfaces. Safety is super gritty and take down pins are super tight.

Nice workmanship, Iâm sure mil specs (2.9.2018)

The materials that they used look durable/strong,

Iâm sure itâs a mil specs

Lue 10 arvostelua lisää brownells.com sivustolla

49.9 49.9 1 EUR

Tuotenro: 100500154
ZRO DELTA AR-15 LOWER PARTS BUILDER KIT
Valmistajan tuotenumero: 703500081520 Tämä paranneltu Lower Parts Kit on fosfaattipinnoitettu ja sisältää kaikki perustarvikeosat LPK:lle lukuun ottamatta liipaisukaarta, pistoolikahvaa ja tulenjohtokokoonpanoja.

49.9 EUR 20 49,90 € *

Toimitusaika noin 2-4 viikkoa.
Yli 10 kpl. USA:n varastossa

Ominaisuudet: Merkki: AR-15

Lisää toivelistaan

Kysy tuotteesta

Tiedot

Lisää toivelistaan

Kysy tuotteesta

Ominaisuudet

Valmistaja: AR-15 Toimituksen paino: 0,07kg Toimituksen korkeus: 25mm Toimituksen leveys: 76mm Toimituksen pituus: 114mm

Tuotekuvaus

Made in USA
USA:n vientiluvan tyyppi: 0A501.x

The Enhanced Lower Parts Kit is phosphate coated and includes all the foundational parts for the LPK minus the Trigger Guard, Grip, and Fire Control Assemblies.

Lisää...

Tämä paranneltu Lower Parts Kit on fosfaattipinnoitettu ja sisältää kaikki perustarvikeosat LPK:lle lukuun ottamatta liipaisukaarta, pistoolikahvaa ja tulenjohtokokoonpanoja.

Lisää...

Asiakasarviot: ZRO DELTA AR-15 LOWER PARTS BUILDER KIT

Arvioiden lukumäärä: 10
Arvostelut brownells.com sivustolla: 10
Arvioiden keskiarvo: 2,9

Great quality at a reasonable price! (31.3.2017)

I do not recommend. (12.5.2017)

Works fine (25.8.2017)

Used in a build for a friend. I didn't notice any problems. It went into an Anderson lower and I did not use the trigger springs.

Will buy another for future builds

Kind of an odd LPK... (2.9.2017)

Get what you pay for (12.12.2017)

Poor quality overall (31.12.2017)

For the money...this kit can't be beat! (19.1.2018)

Waste of Money (6.2.2018)

Would not recommend to anyone. Parts were chiseled to dimensions. Poor quality.

Terrible... (8.8.2018)

Good cheap kit, finish is awful, obvious porosity in casting surfaces. Safety is super gritty and take down pins are super tight.

Nice workmanship, Iâm sure mil specs (2.9.2018)

The materials that they used look durable/strong,

Iâm sure itâs a mil specs

Lue 10 arvostelua lisää brownells.com sivustolla

Muut ostivat

HARFORD ENGRAVING SERVICES AR-15 "DON'T TREAD ON ME"/U.S. FLAG
AR-15/M16 ENGRAVED EJECTION PORT COVERS

HARFORD ENGRAVING SERVICES

Ei saatavilla

16,90 € *

Hylsynpoistoaukon suojat

4,4

BROWNELLS M4 BUFFER SPRING (CS)
AR-15/M16 BUFFER SPRINGS

BROWNELLS

Varastossa

11,90 € * 11,90 € - 29,90 €*

Rekyylijouset

DEWEY AR-15 GAS TUBE STAINLESS STEEL CARBINE
AR-15 GAS TUBE STAINLESS STEEL

DEWEY

Voi laittaa jälkitilaukseen

24,90 € * 24,90 € - 29,90 €*

Kaasuputket

4,7

AR-15 RIISUTTU ALARUNKO GEN2 5.56MM - AR-15 riisuttu alarunko Gen2

AR-15 riisuttu alarunko Gen2
AR-15 RIISUTTU ALARUNKO GEN2 5.56MM

AERO PRECISION

Varastossa

279,90 € *

AR-15 alakerrat ja alarungot

J P ENTERPRISES AR-15 SPRING KIT
AR-15 REDUCED POWER SPRING KIT

J P ENTERPRISES

Varastossa

26,90 € *

Liipasimen jouset

4,7

Kirjaudu sisään

Unohditko salasanasi?
Rekisteröidy

Some

Sivuillamme

Tuoteryhmät

Tilaaminen

Asiakaspalvelu

Tervetuloa!

Tervetuloa brownells.fi sivustolle. Meillä on Suomen laajin valikoima asesepän tarvikkeita ja työkaluja, aseiden osia, jälleenlatausvälineitä, luoteja, hylsyjä, ammuntavarusteita, optiikkaa ja paljon muuta. Kymmenien tuhansien tuotteiden varasto, josta voit valita itsellesi sopivimmat tuotteet, olitpa sitten ampuja, metsästäjä tai aseseppä.

Tietoa meistä

Ampujat, metsästäjät, asesepät, aseharrastajat ja aseita työssään käyttävät ovat aina voineet kääntyä Brownellsin puoleen etsiessään korkealaatuisia tuotteita, osia, työkaluja, lataustarvikkeita, optiikkaa tai muuta aseisiin liittyvää. Meillä on aina 100% tyytyväisyystakuu!