Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

AMERICAN DEFENSE MANUFACTURING
AIMPOINT HIGH PROFILE MOUNT

818503010125 100003651
Quick-release lever-lock system clamps solidly to flattop rail and will not work loose even under heavy recoil—the more force acting on the lever, the tighter it locks. Depress the release tab to swing the lever open, and the mount easily lifts off the rifle. Adjustable with a flat head screwdriver or even a coin for an ultra-secure, no-slip fit on almost any Picatinny or Weaver-style rail, including over- or under-sized commercial rails. Lever may be configured to lock to the front or the rear to suit the operator’s preference. Large locking bar on the side of the mount engages the maximum amount of rail area, while the crossbolt and two integral locking lugs ensure rock-solid engagement of rail slots to prevent movement under recoil. Five heavy duty steel hex head screws (three on top, two on bottom) clamp the vertically split ring halves together. Cutouts in the ring sides and in the base reduce weight without sacrificing strength. AD-68 Aimpoint Mount is designed for Aimpoint optics or similar aiming devices requiring a single, 30mm ring, including the Comp C3 and M2/ML2/M3/ML3 series. Available in four configurations to suit a variety of mounting needs. High positions the backup sight picture in the lower 1/3 of the optic viewing area.

SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Height measured from top of rail to bottom of scope body.  High – 1.120” high.

264.9 264.9 1 EUR
Tuotenro: 100003651
AMERICAN DEFENSE MANUFACTURING AIMPOINT HIGH PROFILE MOUNT
Valmistajan tuotenumero: AD68HSTD 818503010125 Pikavapautuslevyn lukitusjärjestelmä kiinnittyy tukevasti flattop-kiskoon eikä löysty edes voimakkaan rekyylin alaisena – mitä enemmän voimaa vaikuttaa vipuun, sitä tiukemmin se lukittuu. Vapautustappia painamalla vipu avautuu, ja jalusta nousee helposti pois kiväärin päältä. Säädettävissä litteällä ruuvimeisselillä tai jopa kolikolla erittäin turvalliseen, liukumattomaan istuvuuteen lähes minkä tahansa Picatinny- tai Weaver-tyylisen kiskon päälle, mukaan lukien yli- tai alikokoiset kaupalliset kiskot. Vipu voidaan konfiguroida lukittumaan eteen tai taakse käyttäjän mieltymysten mukaan. Suuri lukituspalkki jalustan sivussa tarttuu mahdollisimman suureen määrään kiskon aluetta, kun taas poikittaispultti ja kaksi integroitua lukitusnystyrää varmistavat kiskourien kalliovarman kiinnityksen estäen liikkeen rekyylin aikana. Viisi kestävää teräksistä kuusikulmaista pääruuvia (kolme yläpuolella, kaksi alapuolella) puristavat pystysuunnassa halkaistut renkaan puoliskot yhteen. Renkaiden sivuissa ja jalustan pohjassa olevat aukot vähentävät painoa tinkimättä lujuudesta. AD-68 Aimpoint Mount on suunniteltu Aimpoint-tähtäimiä tai vastaavia tähtäyslaitteita varten, jotka vaativat yhden 30mm renkaan, mukaan lukien Comp C3 ja M2/ML2/M3/ML3 -sarjat. Saatavilla neljässä konfiguraatiossa erilaisiin kiinnitystarpeisiin. High asettaa varatähtäinkuvan optisen katselualueen alimman 1/3 osan kohdalle.
264.9 EUR 6 264,90 € *
Toimitusaika noin 2-4 viikkoa.
6 kpl. USA:n varastossa
Ominaisuudet: Jalustojen lukumäärä: 1-Piece Koko: High Korkeus: 1.120'' Merkki: AR-15 Runkoputken halkaisija: 30mm Tyyppi: High Profile Viimeistely: Black Väri: Matte Black

Ominaisuudet

Jalustojen lukumäärä: 1-Piece Koko: High Korkeus: 1.120'' Runkoputken halkaisija: 30mm Tyyli: High Profile Valmistaja: AR-15 Viimeistely: Black Väri: Matte Black Toimituksen paino: 0,091kg Toimituksen korkeus: 58mm Toimituksen leveys: 86mm Toimituksen pituus: 145mm

Tuotekuvaus

Made in USA




Quick-release lever-lock system clamps solidly to flattop rail and will not work loose even under heavy recoil—the more force acting on the lever, the tighter it locks. Depress the release tab to swing the lever open, and the mount easily lifts off the rifle. Adjustable with a flat head screwdriver or even a coin for an ultra-secure, no-slip fit on almost any Picatinny or Weaver-style rail, including over- or under-sized commercial rails. Lever may be configured to lock to the front or the rear to suit the operator’s preference. Large locking bar on the side of the mount engages the maximum amount of rail area, while the crossbolt and two integral locking lugs ensure rock-solid engagement of rail slots to prevent movement under recoil. Five heavy duty steel hex head screws (three on top, two on bottom) clamp the vertically split ring halves together. Cutouts in the ring sides and in the base reduce weight without sacrificing strength. AD-68 Aimpoint Mount is designed for Aimpoint optics or similar aiming devices requiring a single, 30mm ring, including the Comp C3 and M2/ML2/M3/ML3 series. Available in four configurations to suit a variety of mounting needs. High positions the backup sight picture in the lower 1/3 of the optic viewing area.

SPECS: 6061 T6 aluminum, hardcoat anodized, matte black. Height measured from top of rail to bottom of scope body.  High – 1.120” high.

Uutiskirje