Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

EGW
ADAPTER PLATE FOR SIG SAUER M17 DELTAPOINT PRO TO TRIJICON RMR

841370112135 296000707
Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Trijicon RMR red dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation. This mount does not fit: Sig P320 RX Sig P320 X-Five (with Romeo1 cut) Sig M17 Military Surplus
84.9 84.9 1 EUR
Tuotenro: 296000707
EGW ADAPTER PLATE FOR SIG M17 DELTAPOINT PRO TO TRIJICON RMR
Valmistajan tuotenumero: 49500 841370112135 Poista vain aseen takatähtäin ja korvaa se EGW:n kiinnikkeellä, jotta voit asentaa Trijicon RMR -punapistetähtäimen. Voit milloin tahansa irrottaa kiinnikkeen ja palauttaa takatähtäimen paikoilleen. Kiinnitystarvikkeet sisältyvät pakkaukseen. Asennusohjeet: Poista takatähtäin* Asenna EGW:n tähtäinkiinnike irtotähtäimen paikalle Kiristä asetuspultti (jos sovellettavissa) Aseta punapistetähtäin EGW:n tähtäinkiinnikkeelle (punapistetähtäimen ja kiinnikkeen väliin asetettu pieni paperinpala helpottaa irrottamista ja pitää Loctiten pois punapistetähtäimestä.) Levitä sinistä Loctitea mukana tulleisiin kiinnitysruuveihin Kiristä kiinnitysruuvit 15 tuumaan paunaa 2 litteää kantapääpulttia - Mukana Trijicon RMR:lle Mukana tulevat ruuvit vaativat 5/64 tuuman kuusiokoloavaimen asennukseen. Tämä kiinnike ei sovi: Sig P320 RX Sig P320 X-Five (Romeo1-leikkauksella) Sig M17 Military Surplus
84.9 EUR 6 84,90 € *
Toimitusaika noin 2-4 viikkoa.
6 kpl. USA:n varastossa
Ominaisuudet: Jalustojen lukumäärä: 1-Piece Malli: M17, M18, P320 X-Five Legion, P320 X-Carry Materiaali: Aluminum Merkki: Sig Sauer Tyyppi: Adapter Bases Väri: Black

Ominaisuudet

Jalustojen lukumäärä: 1-Piece Malli: M18,M17,P320 X-Five Legion,P320 X-Carry Materiaali: Aluminum Tyyli: Adapter Bases Valmistaja: Sig Sauer Väri: Black Toimituksen paino: 0,045kg Toimituksen korkeus: 25mm Toimituksen leveys: 76mm Toimituksen pituus: 152mm

Tuotekuvaus

Made in USA



Simply remove the rear sight on your gun and replace it with EGW mount in order to mount your Trijicon RMR red dot sight. You can take the mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation. This mount does not fit: Sig P320 RX Sig P320 X-Five (with Romeo1 cut) Sig M17 Military Surplus
Uutiskirje