Brownells Finland - Laajin valikoima aseen osia, lippaita, ammuntatarvikkeita, asesepän työkaluja ja optiikkaa Suomi

REDMANS
.17 CALIBER RIMFIRE BARREL LINERS

770000002
Easily & Professionally Reline Rimfire Rifle Barrels In Your Shop; Made By One Of The Most Respected Names In The Liner Industry
There are untold thousands of rimfire’s all over the country today that need only a barrel liner to bring them back to their original shooting abilities. Some of these guns are beautiful collection pieces, others are fine hunting guns and some of them are just “loved” by their owners who want them back to their original condition. Redman 17 Caliber Rimfire Barrel Liners are button rifled with ultra smooth, uniform finish and sharp, distinct rifling for superb accuracy that’s better than - or equal to - an original, new barrel. The instruction booklet gives complete, easy-to-follow details for either the old, classic method of soldering the liners in or, the more modern method of using ACRAGLAS® for the permanent bond between barrel and liner. Barrel Liner Instruction Book details the systems used by gunsmiths Bob Schuetz, Willis Sprunger and Ralph Walker. Walker used a variable speed hand drill and ACRAGLAS to hold the liner in. Schuetz solders the liner in place. Sprunger extended a regular bit, drilled the hole in a lathe and bonded with ACRAGLAS. WARNING: These Redman gun barrel liners are made for specific cartridges. Only use with specified cartridges listed in item description. To chamber these gun barrel liners in other calibers is dangerous and can cause serious bodily injury.  

SPECS: 4140 steel. .172" (4.36mm) groove dia. 5/16" (7.9mm) O.D., 26-3/8" (67cm) overall, 25" (63.5cm) usable length. Not chambered.

89.9 89.9 1 EUR
Tuotenro: 770000002
REDMANS BROWNELLS/REDMAN 1-9 TWIST LINER, .17 MACH 2 Maassa on lukemattomia pienikaliberisia aseita, jotka tarvitsevat vain piippuvanerin palatakseen alkuperäisiin ampumatarkkuuksiinsa. Osa näistä aseista on kauniita keräilykappaleita, toiset ovat hienoja metsästysaseita ja jotkut niistä ovat vain omistajiensa “rakastamia”, ja he haluavat palauttaa ne alkuperäiseen kuntoonsa. Redman 17 Caliber Rimfire -piippuvanerit on nappirihlattu erittäin sileällä, tasaisella viimeistelyllä ja terävillä, selkeillä rihloilla, jotka takaavat huippuampumatarkkuuden, joka on parempi - tai vähintään yhtä hyvä - kuin alkuperäisessä uudessa piipussa. Piippuvanerin ohjekirja antaa täydelliset, helposti seurattavat yksityiskohdat joko vanhalle, klassiselle menetelmälle, jossa vanerit juotetaan paikoilleen, tai nykyaikaisemmalle menetelmälle, jossa käytetään ACRAGLAS®-liimaa varmistamaan piipun ja vanerin välinen pysyvä liitos. Piippuvanerin ohjeistokirja käsittelee aseaseppien Bob Schuetzin, Willis Sprungerin ja Ralph Walkerin käyttämiä menetelmiä. Walker käytti muuttuvanopeuksista käsiporaa ja ACRAGLAS-liimaa pitämään vanerin paikoillaan. Schuetz juotti vanerin paikalleen. Sprunger pidenti tavallista poranterää, porasi reiän sorvissa ja liitti sen ACRAGLAS-liimalla. VAROITUS: Nämä Redman-aseen piippuvanerit on tehty tiettyjä patruunoita varten. Käytä vain tuotekuvauksessa lueteltuja erityisiä patruunoita. Näiden piippuvanereiden kammiointi muihin kaliipereihin on vaarallista ja voi aiheuttaa vakavia ruumiinvammoja.
89.9 EUR 3 89,90 € *
Toimitusaika noin 2-4 viikkoa.
3 kpl. USA:n varastossa
Ominaisuudet: Patruuna: 17 Mach 2

Ominaisuudet

Patruuna: 17 Mach 2 Toimituksen paino: 0,188kg Toimituksen korkeus: 8mm Toimituksen leveys: 51mm Toimituksen pituus: 699mm

Tuotekuvaus

Made in USA
USA:n vientiluvan tyyppi: 0A501.c




Easily & Professionally Reline Rimfire Rifle Barrels In Your Shop; Made By One Of The Most Respected Names In The Liner Industry
There are untold thousands of rimfire’s all over the country today that need only a barrel liner to bring them back to their original shooting abilities. Some of these guns are beautiful collection pieces, others are fine hunting guns and some of them are just “loved” by their owners who want them back to their original condition. Redman 17 Caliber Rimfire Barrel Liners are button rifled with ultra smooth, uniform finish and sharp, distinct rifling for superb accuracy that’s better than - or equal to - an original, new barrel. The instruction booklet gives complete, easy-to-follow details for either the old, classic method of soldering the liners in or, the more modern method of using ACRAGLAS® for the permanent bond between barrel and liner. Barrel Liner Instruction Book details the systems used by gunsmiths Bob Schuetz, Willis Sprunger and Ralph Walker. Walker used a variable speed hand drill and ACRAGLAS to hold the liner in. Schuetz solders the liner in place. Sprunger extended a regular bit, drilled the hole in a lathe and bonded with ACRAGLAS. WARNING: These Redman gun barrel liners are made for specific cartridges. Only use with specified cartridges listed in item description. To chamber these gun barrel liners in other calibers is dangerous and can cause serious bodily injury.  

SPECS: 4140 steel. .172" (4.36mm) groove dia. 5/16" (7.9mm) O.D., 26-3/8" (67cm) overall, 25" (63.5cm) usable length. Not chambered.

Uutiskirje